U2702A Datasheet, PDF (8/12 Pages) Keysight Technologies – USB Modular Oscilloscope

8 | Keysight | U2701A/U2702A USB Modular Oscilloscope - Data Sheet
Performance characteristics¹ (continued)
External (EXT) triggering (continued)
Trigger level sensitivity
Display
Interpolation
Display types
Persistence
Format
Measurement features
Automatic measurements
Voltage
Time
Frequency
Cursors
Math functions
FFT
Points
Source of FFT
Window
Noise floor
Amplitude
Maximum frequency
For ±1.25 V range setting:
DC to 100 MHz: 100 μV
> 100 MHz: 200 μV
For ±2.5 V range setting:
DC to 100 MHz: 250 μV
> 100 MHz: 500 μV
Sin(x)/x
Dots and vectors
Off, infinite
XY, roll
Measurements are continuously updated.
Cursors track last selected measurement.
Peak-to-peak, maximum, minimum, average, amplitude, top, base, Vrms,
overshoot, preshoot, crest, standard deviation, cycle RMS, RMS AC
Frequency, period, +width, –width, +duty cycle, –duty cycle, rise time, fall time, delay, phase
Maximum peak
–– Modes: Manual
–– Type: Time, voltage and frequency (FFT)
–– Measurements: DT, DV, frequency, Peak Scan (FFT), DPeak
Add, substract, multiply, FFT, divide
1250 points (for 500 ns and above)
Source channels 1 or 2
Hanning, Hamming, Blackman-Harris, Rectangular, Flattop
–50 dB to –90 dB depending on averaging
Display in dBV
250 MHz
1.  All specifications are warranted. specifications are valid after a 30-minute warm-up and within ±100 ºC of last calibration temperature.