E2667B Datasheet, PDF (7/10 Pages) Keysight Technologies – USB 2.0 Signal Quality Test Option

07 | Keysight | DSOX4USBSQ and DSOX6USBSQ USB 2.0 Signal Quality Test Option for 4000 and 6000 X-Series - Data Sheet
Recommended Oscilloscope Configuration
The signal quality test option (DSOX4USBSQ or DSOX6USBSQ) is compatible with any
InfiniiVision 4000 X-Series oscilloscope running on firmware version 3.10 or later, or 6000
X-Series oscilloscope. However, signal quality tests on hi-speed devices and hosts require an
InfiniiVision 1.5-GHz or higher bandwidth model.
Although the USB 2.0 trigger and decode options are not required in order to run USB signal
quality tests, if you plan to run these tests on “live traffic” (non-compliance testing), the USB
trigger and decode options are recommended for isolating specific packets to test.
Even though one of the USB 2.0 signal quality tests is an eye-diagram mask test, the
DSOX4MASK or DSOX6MASK mask test option is not required.
Ordering Information
Refer to the InfiniiVision 4000 and 6000 X-Series oscilloscope data sheets for ordering information about specific oscilloscope models
and other licensed options.
Description
USB 2.0 signal quality test option
USB 2.0 low- and full-speed trigger and decode option
USB 2.0 hi-speed trigger and decode option
1.5 GHz InfiniiMode differential active probe
3.5 GHz InfiniiMode differential active probe
USB 2.0 low- and full-speed test fixture (SQuIDD)
USB 2.0 hi-speed device test fixture kit
USB 2.0 hi-speed host test fixture kit
Model Number
DSOX4USBSQ or DSOX6USBSQ
DSOX4USBFL or DSOX6USBFL
DSOX4USBH or DSOX6USBH
N2750A
N2751A
E2646B
E2666B
E2667B
Related Keysight Literature
Publication title
Physical Layer Testing of the USB 2.0 Serial Bus – Application Note
Characterizing Hi-Speed USB 2.0 Serial Buses In Embedded Designs - Data Sheet
Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
InfiniiVision 4000 X-Series Oscilloscopes - Data Sheet
InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet
Using Oscilloscope Segmented Memory for Serial Bus Applications - Application Note
N2750A/51A/52A InfiniiMode Differential Active Probes – Data Sheet
Triggering on Infrequent Anomalies and Complex Signals using Zone Trigger - Application Note
Publication number
5991-4167EN
5991-1148EN
5990-6677EN
5991-1103EN
5991-4087EN
5990-5817EN
5991-0560EN
5991-1107EN
Product web site
For the most up-to-date and complete application and product information, please visit our
product web site at:
www.keysight.com/find/4000XSeries
www.keysight.com/find/6000XSeries