U4301B Datasheet, PDF (4/19 Pages) Keysight Technologies – PCI Express 3.0 Analyzer Module

04 | Keysight | U4301B PCI Express^® 3.0 Analyzer Module - Data Sheet
System Architecture Overview
1
2
3
4
1. PC controller to manage and interact with the system
2. 2‑slot modular chassis
3. U4301B protocol analyzer module controlled via M9536A embedded controller or by PCIe link to external PC
4. U4322A soft touch mid-bus probe 3.0
Configuration
Step 1
Step 2
Step 3
Step 4
Step 5
–– Order the U4301B analyzer module. Standard configuration is x1 linkwidth, 5 Gbps, 8 GB capture buffer
–– Upgrade linkwidth to x4, x8, or x16
–– Upgrade to 8 GT/s
–– Order a modular chassis
–– Recommended chassis is the Keysight M9502A 2-slot AXIe chassis or optionally the Keysight M9505A 5-slot AXIe chassis
–– Select a PC controller—Keysight recommends the M9536A embedded controller—or select an external PC that meets the
performance requirements specified in PXI and AXIe Modular Instrumentation, Tested Computer List - Technical Note
(http://literature.cdn.keysight.com/litweb/pdf/5990-7632EN.pdf)
Order the probe for your measurement application
–– U4321A solid-slot interposer 3.0: Order the option for the number of lanes to be tested
–– U4322A mid-bus probe based on Keysight soft touch technology
–– U4324A flying lead solder down probe: Order the option for the number of lanes to be tested
–– U4328A M.2 interposer socket 3 (M-key)
–– U4330A U.2 (SFF-8639) interposer for single or dual link
Add the exerciser for stimulus/response testing
–– U4305 exerciser: Order the option for the number of lanes to be tested and software licenses for applications such as end node
or root complex emulation, LTSSM, SR/MR-IOV, or NVMe emulation
Note: The slot interposer and exerciser lane width is fixed and is not upgradable due to the connector size being a function of lane width. A smaller lane width probe can be
used in a wider lane application, but only those lower lanes will be tested. Keysight does not recommend or support the use of lane converters.