81160A Datasheet, PDF (4/36 Pages) Keysight Technologies – Pulse Function Arbitrary Noise Generators

04 | Keysight | 81150A and 81160A Pulse Function Arbitrary Noise Generators – Data Sheet
The 81160A Pulse
Function Arbitrary Noise
Generator at a Glance
81160A
–– 1 µHz – 330 MHz pulse generation with variable rise/fall time
–– 1 µHz – 500 MHz sine waveform output
–– 14-bit, 2.5 GSa/s arbitrary waveforms
–– Up to 256k samples deep arbitrary waveform memory per channel
–– Pulse, sine, square, ramp, noise and arbitrary waveforms
–– Noise, with selectable crest factor, and signal repetition time of 20 days
–– FM, AM, PM, PWM, FSK modulation capabilities or 2 channel, coupled and
uncoupled
–– Differential outputs
–– Amplitude:
50 Ω into 50 Ω
50 Ω into open
50 mV_PP to 5 V_PP
100 mV_PP to 10 V_PP
–– Voltage window:
50 Ω into 50 Ω
50 Ω into open
±5V
± 10 V
–– Glitch-free change of timing parameters
(delay, frequency, transition time, width, duty cycle)
–– Programming language compatible with Keysight 81101A, 81104A, 81105A,
81110A, 81130A and 81150A
–– ISO 17025 and Z540.3 calibration
–– LXI class C (rev 1.1) compliant
–– Optional pattern generator:
–– Ideal and arbitrary bit shaped pattern up to 330 Mbit/s (Option 330) or
660 Mbit/s (Option 660)
–– Two, three or four level signals
–– PRBS up to 231
–– 4 Mbit pattern memory for the 1-channel instrument and 2 Mbit per channel
for the 2-channel instrument
–– Pass through pattern for combined and physical and protocol test up to 10 Mbit/s