U2352A Datasheet, PDF (3/25 Pages) Keysight Technologies – USB Modular Multifunction Data Acquisition Devices

High sampling rate
The U2300A Series DAQ devices can generate sampling rates of up to 3 MSa/s
for a single channel. When multiple channels are configured, the device can
sample data up to 1 MSa/s. The fast sampling capability allows users to perform
intermittent detection easily. This is ideal when dealing with high density analog
input/output signals especially when juggling between different input ranges
and sampling requirements.
Flexible standalone or modular capability
The U2300A Series DAQ devices are uniquely designed with the flexibility to
function as a standalone unit or as a part of a modular unit. When used together
with the U2781A modular product chassis, the devices has the capability to sup-
port up to 384 channels.
Flexible system and control options with polling and
continuous mode
The U2300A Series DAQ devices have two modes, polling mode and continuous
mode. Selecting continuous mode enables you to acquire data continuously
once the trigger signal is received.
Arbitrary waveform
Designed to support arbitrary waveforms, the U2300A Series allows you to
generate arbitrary waveform via the Keysight Measurement Manager application
software or SCPI commands.
Burst mode
Equipped with the burst mode, the enhancement feature enables simultaneous
mode for analog input acquisition. Now can you can perform sampling measure-
ment up to the highest possible speed of the DAQ.
Trigger sources
U2300A Series offers various trigger options from immediate trigger (none),
analog/external digital trigger, System Synchronous Interface (SSI)/ Star trigger
and Master/Slave trigger sources. These entire trigger options has the capability
to configure trigger sources during A/D and digital-to-analog (D/A) operations.
Selecting the slave trigger and SSI/Star trigger are recommended when the
USB modules are used together with the Keysight U2781A USB modular product
chassis.
Predefined function generator
Aside from supplying DC voltage, the two analog output channels are capable of
generating common and predefined waveforms such as sinusoidal wave, square
wave, triangle wave, sawtooth wave and noise wave.
3