N1417A Datasheet, PDF (3/16 Pages) Keysight Technologies – Femto/Picoammeter and Electrometer/High Resistance Meter

03 | Keysight | B2980A Series Femto/Picoammeter and Electrometer/High Resistance Meter - Data Sheet
The World’s Only Graphical Picoammeter/Electrometer that can
Confidently Measure Down to 0.01 fA and Up to 10 PΩ
0.01 fA digit
Battery
Best-in-class 2 pA to 20 mA
current measurement ranges
and internal 1,000 V sourcing
capability ensure accurate
0.01 fA and 10 PΩ measurements
Battery operation eliminates
AC power line noise from
measurements
Time domain view (roll view)
enables capture of transient
signal effects and selection of
desired measurement data
Real-time histogram provides
quick statistical analysis of
measurement data
Test Setup Integrity Checking
function and dedicated
accessories ensure maximum
measurement accuracy
B2980A Series Key Features
–– 0.01 fA (10^-17 A) minimum measurement resolution and 2 pA to 20 mA current
–– measurement ranges with 6.5 digits resolution
–– < 20 μV burden voltage in its lowest current range
–– High speed reading rate up to 20,000 rdg/s
–– Battery operation models for line noise free measurements¹
–– Built-in ± 1,000 V voltage source²
–– Measurement resistances up to 10 PΩ (10¹⁶ Ω)²
–– > 200 TΩ input impedance for up to 20 V voltage measurement²
–– Independent current and voltage measurement²
–– Charge measurement down to 2 nC range with 6.5 digits resolution²
–– Temperature and humidity measurements²
–– Graphical viewing modes (Meter, Graph, Histogram and Roll View)
–– Easy-to-use auto navigation to select optimal range and aperture
–– Optional Test Setup Integrity Checker function for noise source isolation
–– Versatile interface (USB 2.0: LAN, GPIB, LXI Core)
–– USB (front): store data, save/recall setup information
–– Free PC control software
1.  B2983A and B2987A
2.  B2985A and B2987A
Application Examples
–– Material science (Biomaterials, ceramics, elastomers, films, dielectric materials,
electrochemical, ferroelectric materials, graphene, metals, organic materials, nano-
materials, polymers, semiconductors, etc.)
–– Devices & electronic components (capacitors, resistors, diodes, sensors, transistors
including TFT and CNT, optoelectronics, solar cells, etc.)
–– Electronic/non-electronic systems (ion beam, electron beam, sensing systems,
particle measurements, embedded precision instruments, etc.)
Why is 0.01 fA resolution
important?
Many materials science and device
characterization applications require
the ability to measure very small
currents that conventional DMMs
(digital multi-meters) cannot handle.
Since the B2980A series provides
a best-in-class 0.01 fA current
measurement resolution in both
its Femto/Picoammeter and
Electro-meter versions, it can
perform precise and detailed
measurements that were previously
impossible using conventional
picoamme­ters and electrometers.
Therefore, you are assured that your
current measurement requirements
will be met well into the future.
Typical current
measurement ranges
10 A
1A
1 mA
1 μA
1 nA
1 pA
1 fA