N1417A Datasheet, PDF (13/16 Pages) Keysight Technologies – Femto/Picoammeter and Electrometer/High Resistance Meter

13 | Keysight | B2980A Series Femto/Picoammeter and Electrometer/High Resistance Meter - Data Sheet
Measurement control/navigation
Ranging
Aperture time (integration time)
Offset cancelling
Digital filter
Math
Statistics
Line frequency detection
Measurement indicators
Front panel operation
Front panel interface
View mode
Hardkeys
Softkeys
Indicators
LEDs
Application softkey
Automatic or manual
10 μs to 100 PLC
Null, Zero correct
Median filter (2R + 1, R = 1 to 15), moving average (1 to 100, step 1)
Preset and user definable expressions
Histogram View mode: mean, sigma, # of bins and # of samples
Auto detect: 50 Hz or 60 Hz
"---" is displayed at no data captured, "OVERFLOW" is displayed over 105% of the range, "0 Ω" is displayed at
current measurement overflow in Resistance measurement.
4.3" TFT color display (16,000,000 colors, 480 x 272 pixels) with keypads and rotary knob
Meter view, Graph view, Histogram view and Roll view
Single Trigger and Run/Stop control, measurement navigation keys (Null, Filter, Math, Save and Recall),
Rotary Knob and Cursors, Ammeter Input and V Source Output control, Cancel/Local
Function, System and Input Assist Keys
Channel (measurement) status, System status
Power (color changes when charging), Input and Output (color changes when high voltage sourcing), Battery
status (B2983A, B2987A)
Setup Integrity Checker (optional), Data logger, Demo Slide Show, About B2987A
Meter view
Graph view
Input/Output specifications
Meter input connector
Guard
Maximum input
Source output connector
Maximum common mode voltage
Isolation (Meter common to chassis)
Analog output
Interlock
External trigger
Trigger input
Logic
Min pulse width
Trigger output
Logic
Min pulse width
Histogram view
Roll view
Three lug triaxial for ammeter on rear panel (B2981A, B2983A)
Three lug triaxial for ammeter, and three lug triaxial for voltmeter on rear panel (B2985A, B2987A)
Switchable voltmeter guard available (B2985A, B2987A)
Ammeter: 30 mA, Voltmeter: 40 V
Two banana jacks on rear panel
Meter common: 500 V peak: V Source 1,000 V peak
> 10 GΩ, < 500 pF
2 V for full range input, non-inverting in voltage and current measurement modes, 1 kΩ output impedance
2.5 mm pluggable terminal block, 4 pin (mating with Phoenix Contact 1881341)
BNC
Programmable edge triggered
10 μs
BNC
Programmable edge triggered
10 μs