Z-SERIES Datasheet, PDF (20/41 Pages) Keysight Technologies – Infiniium Z-Series Oscilloscopes

20 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: Serial Data Equalization (N5461A)
Significantly reduce receiver
errors by opening even tightly
shut eyes through equalization
emulation
Serial data equalization for the Z-Series
provides fast and accurate equalization
using decision feedback equalization
(DFE), feed-forward equalization (FFE),
and continuous-time linear equalization
(CTLE) modeling in real-time. Serial data
equalization software allows you to input
your own self-designated tap values
to verify your design. If you prefer, the
software will find the optimal tap values
for you. CTLE allows DC gain and two-pole
modeling.
Analysis Tools: InfiniiScan
(N5414B)
Trigger on events that hardware
triggers can’t handle
InfiniiScan software allows you to use an
oscilloscope to identify signal integrity
issues that hardware triggering is unable
to find in your electronic designs. This
innovative software scans through
thousands of acquired waveforms
per second to help you isolate signal
anomalies, saving you time and improving
designs.
Innovative triggers
The zone qualify finder allows you to draw
a “must intersect” or “must not intersect”
zone on the oscilloscope screen to visually
determine the event identify condition. If
you can see the event of interest on the
screen, you can create a trigger that will
isolate it, saving significant time over some
complicated hardware triggers.
Draw zones on your screen for a unique triggering experience.
Other triggers include non-monotonic
edge, measurement limit search, runt and
pulse width.