U1250 Datasheet, PDF (2/15 Pages) Agilent(Hewlett-Packard) – Agilent U1250 Series Handheld Digital Multimeters

2 | Keysight | U1250 Series Handheld Digital Multimeter - Data Sheet
The Keysight Technologies,
Inc. U1250 Series handheld
digital multimeters (DMMs)
exceed your expectations by
delivering powerful features
and performance that meet
your toughest requirements
and applications. The series
latest multimeters, the
offering capabilities and
functions you need.
Key Features
–– Superior contrast from organic
LED (OLED) display¹
–– 50,000-count dual display
–– Up to 0.025% basic DCV accuracy
–– True-RMS AC and AC+DC²
measurements
–– K-type and J-type² temperature
measurements
–– Manual and automated (interval)
data logging; internally to DMM
and externally to PC
–– CAT III 1000 V and CAT IV 600 V
safety protection
–– Built-in 20-MHz frequency counter²
–– Built-in programmable square-wave
generator²
Do More with Just One
Instrument
The basic model, U1251B, expands your
capabilities beyond typical DMM measure-
ments to include data logging. The U1252B
starts with the same foundation, and then
adds a 20-MHz frequency counter and
programmable square-wave generator—
so you’d be able to perform more tests
conveniently with one tool. What’s more:
both models come bundled with a com-
plete set of accessories to equip you right
from the start at no extra cost.
Offering the same functionality as the
U1252B, the U1253B is the world’s first
OLED handheld DMM. You won’t have to
squint to be sure you’re reading it right:
On the go or on the bench, you’ll get
crystal-clear viewing indoors, even in dark,
off-angle situations.
Find Problems Quickly
Troubleshooting can be tricky, espe-
cially when you’re dealing with elusive
problems. With the U1250 Series’data
logging capability, you can ensure that
every reading gets recorded manually or
at intervals you specify. Better yet: you
can have virtually unlimited data logging
saves when you connect any of the U1250
Series DMM to a PC with the optional
IR-to-USB cable.
In addition, the U1250 Series lets you
achieve greater confidence in your
measurements with accurate true-RMS
AC measurements, low DCV error rate of
up to 0.025% and high-resolution display
of 50,000 counts.
Uncompromising
Ruggedness and Safety
Figure 1. Automate recording of measurements with
bundled GUI data-logging software.
The U1250 Series DMMs are housed in
robust overmold enclosures, rated at CAT
III 1000 V and CAT IV 600 V and operate
over a wide temperature range of –20 °C
to +55 °C. Each DMM also include a 30 kA
high energy fuse to further protect you
against violent fuse failures during high-
current measurements. Built tough and
certified to stringent industrial standards,
the U1250 DMM is what you need to face
the demands of everyday tasks.
1.  U1253B model
2.  U1252B/U1253B models