U4305B Datasheet, PDF (16/20 Pages) Keysight Technologies – Protocol Exerciser for PCI Express® 3.0

16 | Keysight | U4305B Protocol Exerciser for PCI Express^® 3.0 - Data Sheet
Specifications and Characteristics
Physical characteristics
Size
Standard height half-length PCIe module 106.7 mm (4.2 inches) high and 167.65 mm (6.6 inches) long
Weight
408 gr (0.9 lb)
Shipping weight: 2.36 Kg (5.2 lb)
Connectors
Power input, USB 2.0B, and two SMA(f) connectors for trigger in and out. Edge connector width is determined by the product
configuration purchased. Note: The edge connector is not upgradable after purchase and Keysight does not recommend or
support the use of lane adaptors as they have a negative impact on the unit’s performance at high speeds.
Power requirements
Input
15 Vdc, 10 A maximum
Power dissipation
70 W maximum
Keysight part number 0950-5159 external power supply supplied with the Exerciser
Input
100 to 240 V at 3.5 A maximum, 50 to 60 Hz
LTSSM supported states
The Keysight U4305B supports seven of the 11 LTSSM states. The supported states are:
–– Detect
–– Quiet
–– Configuration
–– L0
–– Recovery
–– L0s
–– L1
U4305B trigger specifications
Trigger output
Source impedance
50 ohms
Amplitude
2.4 V open circuited, 1.2 V into 50 ohms
Pulse width
120 ns
Trigger input
Maximum input
2.0 V
Input impedance
Approximately 4 k ohms
Environmental specifications
This instrument is intended for indoor use in an installation category II, pollution degree 2 environment.
Temperature
Operating: 0 to +45 °C
Storage: –40 to +70 °C
Humidity
15% to 95% operating, non-condensing
Altitude
2000 m (6,500 feet) maximum
Safety
IEC 61010-1:2001 / EN 61010-1:2001
Canada: CSA C22.2 No. 61010-1:2004
USA: UL 61010-1: 2004