N1076A Datasheet, PDF (14/19 Pages) Keysight Technologies – Electrical and Optical Clock Data Recovery Solutions

14 | Keysight | Electrical and Optical Clock Data Recovery Solutions - Data Sheet
Specifications
N1076A/N1077A clock recovery
Electrical data input (±)
Data rate input range
Minimum input level to acquire lock
Input voltage levels (min/max)
Minimum transition density
Interface
Connector type
Recovered clock output
Clock output range
Recovered clock random jitter
Loop bandwidth range
Loop bandwidth accuracy
Clock recovery peaking range
Tracking range (includes SSC tracking)
Acquisition range
Auto relocking
Residual spread spectrum
Front panel recovered clock amplitude
Front panel recovered clock divide ratio (user
selectable)
Internal frequency counter accuracy
Interface
Connector type
Aux clock output
Output frequency
Output voltage
Output jitter
Interface
Connector type
Rear panel
Connectors
General characteristics for N1076A/N1077A
Line power
Operating temperature
Non-operating temperature
Dimensions
Without front connectors and rear feet
With front connectors and rear feet
With front cover and rear feet
Remote control interface
Connectivity
Programming language
System requirements
Option 216
Option 232
50 MBaud to 16 GBaud
50 MBaud to 32 GBaud
50 MBaud to 16.4 GBaud (characteristic)
50 MBaud to 32.8 GBaud (characteristic)
Single-ended: 28 mVpp, 20 mVpp characteristic
Differential: 56 mVpp, 40 mVpp characteristic
–2.2 to 3.2 V, V/2 Vpp, max
20%
Differential or single-ended, AC coupled, 50 Ω
2.92 mm (f)
Option 216
Option 232
50 MHz to 16 GHz (full-rate clock)
16 GHz max
200 fs max at ≥ 2 Gb/s, 120 fs at 16 GHz (characteristic)
0.015 to 20 MHz
± 30%, characteristic
Up to 4 settings (dependent on loop BW)
± 2500 ppm ± 0.25%, characteristic
± 5000 ppm, characteristic
Yes
–84 dB ± 3 dB at 33 kHz, characteristic
350 mVpp at 10 GHz
1, 2, 4, 8, 16
Option 216
± 10 ppm
Single-ended, AC coupled, 50 Ω
2.92 mm (f)
4 to 8 GHz
600 mVpp, characteristic
< 50 fs RMS, characteristic
Single-ended, AC coupled, 50 Ω
2.92 mm (f)
Option 232
USB 2.0, IEC power connector
100/120 Vac
50/60/400 Hz
220/240 Vac
50/60 Hz
50 W maximum
The products can operate with mains supply voltage fluctuations up to ± 10% of the nominal voltage
10 to +40 °C (50 to +104 °F)
–40 to +70 °C (–40 to +158 °F)
88.26 mm H x 207.40 mm W x 485 mm D (3.48 inch x 8.17 inch x 19.01 inch)
103.31 mm H x 219.56 mm W x 517.80 mm D (4.07 inch x 8.64 inch x 20.39 inch)
110.18 mm H x 219.56 mm W x 550.71 mm D(4.34 inch x 8.64 inch x 21.68 inch)
USB 2.0 rear panel (connected to 86100D DCA-X or external PC running N1010A FlexDCA)
Command line programming interface, SCPI
See FlexDCA download page at www.keysight.com/find/flexdca_download