E6716G Datasheet, PDF (12/15 Pages) Keysight Technologies – E6702G cdma2000/IS-95/AMPS

12 | Keysight | E6702F cdma2000/IS-95/AMPS Lab Application - Technical Overview
SMS (continued)
SMS mobile terminated message privacy None, not restricted, restricted, confidential, and secret
SMS mobile terminated message alert
Default, low, medium, high, and none
SMS mobile terminated message encoding Octet, 7-bit ASCII, IA5, UNICODE, shift-JIS, Korean, Latin/Hebrew,
Latin, and GSM 7-bit default alphabet
SMS mobile terminated message optional
user data
Include or exclude
SMS mobile terminated call back number Include or exclude; set to the originating address when included
SMS mobile terminated message entry
Hex or ASCII
SMS mobile terminated message length
Maximum of 255 ASCII characters or 510 hex characters
SMS mobile terminated message repeat
1 up to 255 repetitions of the entered data
SMS mobile terminated messaging editing Append data, overwrite data, insert data, clear to end, backspace,
and delete character
SMS mobile terminated message status
Provides status of SMS message transmission and reports cause
codes
SMS mobile originated protocol control
Enabled, disabled, not supported, or unknown address
SMS mobile originated display
Auto, ASCII, or hex
SMS mobile originated message status
Message count, teleservice type, destination address, destination
address encoding, priority, call back number, call back number
encoding, message encoding, and message length
Paging message error rate
Paging channel data rate
Selectable full or half rate
Paging channel MER report
Provides the calculated paging channel message error rate, the mo-
bile reported PAG_3, the number of paging messages transmitted by
the test set, and the paging MER test time
Paging MER procedure control
Start and stop; only available when a call is connected; “start”
resets the phone’s PAG_3 value and starts the paging MER timer
and counter; “stop” retrieves the mobile’s PAG_3 value and stops the
paging MER timer and counter
Paging MER calculation
Computes the MER from the ratio of the mobile reported value of
PAG_3 and the number of paging messages sent by the test set dur-
ing the test interval
Audit order control
Settable on/off
Clear paging MER procedure parameters
function
Clears all of the paging MER-related parameters
Paging channel E_b/N_t display
Displays the signal-to-noise ratio of the paging channel when AWGN
is on
IS-2000 test mode functionality
Resident formats
IS-2000 SR1
Control channel configuration
PCH/ACH or BCCH/CCCH/EACH
Cell 1 overhead channels (Control channels = PCH/ACH)
F-pilot
With settable PN offset
F-sync
With real-time long code and system time update and updates for
entered parameters
F-paging
With real-time overhead messages
F-QPCH
Indicates if active page will be in the next paging channel slot
Cell 1 overhead channels (Control channels = BCCH/CCCH/ EACH)
F-pilot
With settable PN offset
F-sync
With real-time long code and system time update and updates for
entered parameters