F862BC104M310Z Datasheet, PDF (5/14 Pages) Kemet Corporation – F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)

Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Impedance Graph
Z [W]
100
10
1
0.1
0.1 µF p. 15
0.01
1 µF p. 27.5 ^{0.33 µF p.22.5}
0.001
0.1
1
10
100
F [MHz]
Environmental Test Data
Test
Endurance
Vibration
Bump
Change of Temperature
Active Flammability
Passive Flammability
Damp Heat Steady State
IEC Publication
IEC 60384–14
IEC 60068–2–6 Test Fc
IEC 60068–2–29 Test Eb
IEC 60068–2–14 Test Na
IEC 60384–14
IEC 60384–14
IEC 60068–2–78 Test Cab
THB Test
Procedure
1.25 x V_R VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second,
1,000 hours at upper rated temperature
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s²
1,000 bumps at 390 m/s²
Upper and lower rated temperature 5 cycles
V_R + 20 surge pulses at 2.5 kV (pulse every 5 seconds)
IEC 60384–1, IEC 60695–11–5 Needle-flame test
+40°C and 93% RH, 56 days
85°C, 85% RH and 240 VAC, 1,000 hours
Capacitance change (∆C/C): ≤ 10%
Dissipation factor change (∆tan δ): ≤ 5 * 10^-3 (at 1 kHz)
Insulation resistance Rins or time constant τ = CR
Rins: ≥ 50% of initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3092_F862_X2_310 • 9/23/2016 5