F862BC104M310Z Datasheet, PDF (4/14 Pages) Kemet Corporation – F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)

Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Performance Characteristics
Rated Voltage
Capacitance Range
Capacitance Tolerance
Temperature Range
Climatic Category
Storage Conditions
Approvals
Dissipation Factor
Test Voltage Between Terminals
Insulation Resistance
In DC Applications
310 VAC 50/60 Hz
0.1 – 4.7 µF
±20%, ±10%
−40ºC to +110°C
40/110/56
Storage time: ≤ 24 months from the date marked on the label
package
Average relative humidity per year ≤ 70%
RH ≤ 85% for 30 days randomly distributed throughout the year
Dew is absent
Temperature: −40 to 80°C (see "Maximum Humidity in Storage
Conditions" graph below)
ENEC, UL, cUL, CQC
Maximum Values at +23°C
C ≤ 0.1 µF
C > 0.1 µF
1 kHz
0.3%
0.2%
The 100% screening factory test is carried out at 1,900 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is
a risk of damage to the capacitor. KEMET is not liable in such
case for any failures.
Minimum Values Between Terminals
C ≤ 0.33 µF
≥ 30,000 MΩ
C > 0.33 µF
≥ 10,000 MΩ • µF
Recommended voltage ≤ 630 VDC
Maximum Humidity in Storage Conditions
100
90
80
70
60
50
40
30
20
30 Days
10
Annual Average
0
−40 −20
0
20
40
60
80
Temperature (ºC)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3092_F862_X2_310 • 9/23/2016 4