C961U222MWWDAA7317 Datasheet, PDF (13/15 Pages) Kemet Corporation – Safety Standard Recognized, 900 Series, Encapsulated, AS Type, X1 760 VAC/Y1 500 VAC (Industrial Grade)

Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, 900 Series, Encapsulated, AS Type, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Figure 1 - Ammo Pack Taping Format (10 mm Lead Spacing)
P₂
P
D
∆S
e
P₁
F
Ød
W₂
L
H_{0 W1}
W₀
W
P₀
ℓ
ØD₀
∆h₁
T maximum
Marking Side
0 ∆h₂
t₂
t₁
Table 3 – Ammo Pack Taping Specifications
Lead Spacing
10 mm
Lead Style
Straight
Preformed¹
Item
Lead Spacing
Component Pitch
Sprocket Hole Pitch
Sprocket Hole Center to Component Center
Sprocket Hole Center to Lead Center
Body Diameter
Component Alignment (side/side )
Carrier Tape Width
Sprocket Hole Position
Height to Seating Plane² (preformed leads¹)
Height to Seating Plane² (straight leads)
Lead Protrusion
Diameter of Sprocket Hole
Lead Diameter
Carrier Tape Thickness
Total Thickness (Carrier Tape, Hold-Down Tape and
Lead)
Component Alignment (front/back )
Cut Out Length
Hold-Down Tape Width
Hold-Down Tape Position
Coating Extension on Leads (meniscus)
Body Thickness
Symbol
F
P
P₀
P₂
P₁
D
∆S
W
W₁
H₀
H
ℓ
D₀
φd
t₁
t₂
∆h₁
∆h₂
L
W₀
W₂
e
T
Dimensions (mm)
10.0±1.0
25.4±2
12.7±0.3
12.7±1.5
7.7±1.5
See Table 1 - Product Ordering Codes and Ratings
0±2.0
18.0+1.0/−0.5
9.0±0.5
N/A
18.0+2.0/−0
20.0+1.5/−1.0
N/A
2.0 maximum
4.0±0.2
0.55±0.1
0.6±0.3
1.5 maximum
2.0 maximum
2.0 maximum
11.0 maximum
11.0 minimum
1.5±1.5
3.0 maximum for straight lead; not to exceed the bend for preformed¹ lead
configurations.
7.0 Maximum
1 _{Preformed (crimped) lead configurations include vertical kink and outside kink. See "Lead Configurations" and "Ordering Information" sections of this}
document for further details.
2 _{Also referred to as "lead length" in this document.}
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1066_X1_760 VAC_Y1_500 VAC • 1/13/2017 13