C961U222MWWDAA7317 Datasheet, PDF (1/15 Pages) Kemet Corporation – Safety Standard Recognized, 900 Series, Encapsulated, AS Type, X1 760 VAC/Y1 500 VAC (Industrial Grade)

Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, 900 Series, Encapsulated,
AS Type, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Overview
KEMET’s 900 series encapsulated radial leaded ceramic
disc capacitors are specifically designed for interference-
suppression AC line filtering applications. Having
internationally recognized safety certifications, these
capacitors are well-suited for applications that require
keeping potentially disruptive or damaging line transients
and EMI out of susceptible equipment. They are also an
ideal solution when needing to suppress line disturbances
at the source.
With a working voltage of 760 VAC in line-to-line (Class X)and
500 VAC in line-to-ground (Class Y) applications, these safety
capacitors meet the impulse test criteria outlined in IEC
Standard 60384. Meeting subclass X1 and Y1 requirements,
these devices are certified to withstand impulses up to 4
KV (X1) and 8 KV (Y1) respectively. These encapsulated
devices also meet the flame test requirements outlined in UL
Standard 94V–0.
Safety Certified Capacitors are classified as either X and/
or Y capacitors. Class X capacitors are primarily used in
line-to line (across-the-line) applications. In this application
there is no danger of electric shock to humans should the
capacitor fail, but could result in a risk of fire. The class Y
capacitor is primarily used in line-to-ground (line by-pass)
applications. In this application, failure of the capacitor
could lead to danger of electric shock.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C9
6
Ceramic
Body
Series Diameter
C9 =
Ceramic
900
Series
1 = 8.0 mm
2 = 9.0 mm
3 = 10.0 mm
5 = 12.0 mm
6 = 13.0 mm
7 = 14.0 mm
8 = 15.0 mm
1
Lead
Spacing¹
1=
10.0 mm
U
222
M
W
W
D
A
A
7317
Spec.
Capacitance Capacitance
Code (pF) Tolerance
Rated
Voltage
Dielectric/
Temp. Char.
Design
Lead Failure Packaging
Config.¹ Rate (C-Spec)
U=
Two
K = ±10% W = X1 W = Y5U D = A = Straight A =
See
Safety significant M = ±20% 760 VAC
Disc B = Vertical N/A "Packaging
digits and
/Y1 500
Kink
C-Spec
number of
VAC
C = Outside
Ordering
zeroes
Kink
Options
Table"
below
1 _{"Vertical Kink" and "Outside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is}
only available on capacitors ordered with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact
KEMET.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1066_X1_760 VAC_Y1_500 VAC • 1/13/2017 1