102R18W101KV4E Datasheet, PDF (35/36 Pages) Johanson Technology Inc. – ceramic capacitor solutions

ELECTRICAL CHARACTERISTICS
PARAMETER
TEMPERATURE
COEFFICIENT:
DISSIPATION
FACTOR:
AGING:
INSULATION
RESISTANCE:
DIELECTRIC
STRENGTH:
TEST
PARAMETERS:
NOTES:
NPO
X7R
0± 30 ppm/°C
-55 to +125°C
± 15%
-55 to +125°C
20%
20%
0%
0%
-20%
-20%
-40%
-40%
-60%
-80%
-55°C -25°C 0°C
25°C 50°C 75°C 100°C 125°C
-60%
-80%
-55°C -25°C
0°C
25°C 50°C 75°C 100°C 125°C
.001 (0.1%) max
WVDC ≥ 50 VDC, DF = 2.5% max
WVDC = 25 VDC, DF = 3.0% max
WVDC = 16 VDC, DF = 3.5% max
None
2.5% / decade hour
1000ΩF or 100GΩ
whichever is less @ 25°C, WVDC
500ΩF or 50GΩ
whichever is less @ 25°C, WVDC
For Vrated = 6 - 200 VDC, DWV = 2.5 X WVDC, 25°C, 50mA max.
For Vrated = 201 - 499 VDC, DWV = 2.0 X WVDC, 25°C, 50mA max.
For Vrated = 500 - 999 VDC, DWV = 1.5 X WVDC, 25°C, 50mA max.
For Vrated = 1000+ VDC, DWV = 1.2 X WVDC, 25°C, 50mA max.
C > 100 pF; 1kHz ±50Hz;1.0±0.2 VRMS
C ≤ 100 pF 1Mhz ±50kHz; 1.0±0.2 VRMS
1kHz ±50Hz;1.0±0.2 VRMS
Tanceram IR = 100 ΩF or 10 GΩ
Tanceram DF for Vrated ≥ 50 VDC = 5% max.
Tanceram DF for Vrated ≤ 25 VDC, DF = 10%
max
± 15%
X5R
-55 to +85°C
20%
0%
-20%
-40%
-60%
-80%
-55°C -25°C 0°C
25°C 50°C 75°C 100°C 125°C
For Vrated ≥ 50 VDC, DF = 5% max
For Vrated ≤ 25 VDC: DF = 10% max
2.5 % / decade hour
100ΩF or 10GΩ
whichever is less @ 25°C, WVDC
DWV = 2.5 X WVDC, 25°C, 50mA max.
1kHz ±50Hz; 0.5±0.2 VRMS
PART NUMBER BREAKDOWN
Part number written: 500R15N101JV4T
500
VOLTAGE
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
251 = 250 V
301 = 300 V
501 = 500 V
631 = 630 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
ACJ = 250 VAC
R15
SIZE
R05=0201
R07=0402
R14=0603
R15=0805
A18=0612
R18=1206
S41=1210
R29=1808
R30=2011
S43=1812
S47=2220
S49=1825
S48=2225
X07=0402 X2Y
X14=0603 X2Y
X15=0805 X2Y
X18=1206 X2Y
X41=1210 X2Y
X44=1410 X2Y
X43=1812 X2Y
N
101
J
V
4
T
DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING
PACKING
N = NPO
W = X7R
X = X5R
1st two digits are * B = ± 0.10 pF V = Nickel Barrier
significant; third
* C = ± 0.25 pF with 100% Tin
digit denotes
* D = ± 0.50 pF Plating (Matte)
number of zeros,
R = decimal.
F= ±1%
G = ± 2%
J = ± 5%
F = Polyterm
flexible termination
100 = 10 pF
K = ± 10%
T = SnPb
102 = 1,000 pF M = ± 20%
474 = 0.47 µF Z = +80 -20%
P = PdAg
475 = 4.7 µF
106 = 10 µF
*Values < 10 pF only
3 = Special (J) E =Embossed 7”
4 = Unmarked T =Punched 7”
6 = EIA Code* U =Embossed 13”
*Not available on ^{R =Punched 13”}
sizes ≥ 0402
No code = bulk
pack
Tape specifications
conform to EIA
RS481
Not all tape styles
are available on
all parts.
PLEASE NOTE: Not all combinations of JDI P/Ns are valid. Please refer to the appropriate “How to Order” section for a particu-
lar product or contact your Sales Representative if you need assistance.
www.johanson dielectrics.com
35