102R18W101KV4E Datasheet, PDF (24/36 Pages) Johanson Technology Inc. – ceramic capacitor solutions

MINI-SWITCH MODE^® CAPACITORS
JDI’s Mini-Switch Mode^® ceramic capacitors combine the
advantages of high capacitance found in tantalum capacitors
with very low ESR performance of ceramic capacitors. The “J”
and “L” lead configurations replace 1825 and 2225 SMT chips
to provide stress relief and prevent cracking due to thermal
cycling or mechanical board flexing. Another plus of the J-lead
style is that this configuration allows use of the same solder
lands as the SMT chips. See the Switch-Mode section for
larger values. See also the Technical Notes on soldering and
handling and suggested solder lands.
FEATURES
• High Capacitance, Small SIze
• Low ESR/ESL
• Leadframe reduces thermal & mechanical stress due to
board flexure and TCE mismatch
APPLICATIONS
• DC-DC Converters
• Power Supply Input & Output Filters
CAPACITANCE SELECTION
SIZE EIA CHIP
NPO Max Capacitance (uF)
X7R Max Capacitance (uF)
CODE SIZE _25V
50V 100V 200V 500V 25V
50V 100V 200V 500V
P09 1825 0.056 0.047 0.039 0.027 0.018 1.5
P29 1825 0.11 0.094 0.078 0.054 0.036 3.0
P39 1825 0.16 0.14 0.11 0.081 0.054 4.5
P49 1825 0.22 0.18 0.15 0.10 0.07
6.0
1.2
0.75 0.56 0.27
2.4
1.5
1.1
0.54
3.6
2.2
1.6
0.81
4.8
3.0
2.2
1.0
P08 2225 0.068 0.056 0.047 0.033 0.027 2.7
2.2
1.5
1.2
0.39
P28 2225 0.13 0.11 0.094 0.066 0.054 5.4
4.4
3.0
2.4
0.78
P38 2225 0.20 0.16 0.14 0.10 0.081 8.1
6.6
4.5
3.6
1.1
P48 2225 0.27 0.22 0.18 0.13 0.10
10
8.8
6.0
4.8
1.5
24
www.johanson dielectrics.com