102R18W101KV4E Datasheet, PDF (10/36 Pages) Johanson Technology Inc. – ceramic capacitor solutions

X2Y^® FILTER & DECOUPLING CAPACITORS
X2Y^® filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors
that are immune to temperature, voltage and aging performance differences.
These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics,
and can replace multiple capacitors and inductors saving board space and reducing assembly costs.
ADVANTAGES
APPLICATIONS
• One device for EMI suppression or decoupling
• Replace up to 7 components with one X2Y
• Differential and common mode attenuation
• Matched capacitance line to ground, both lines
• Low inductance due to cancellation effect
• Amplifier FIlter & Decoupling
• High Speed Data Filtering
• EMC I/O Filtering
• FPGA / ASIC / µ-P Decoupling
• DDR Memory Decoupling
EMI Filtering
(1 Y-Cap.)
Power Bypass
(2 Y-Caps.)
SIZE
0402 (X07)
NPO 50 50 50 50 50 50 50
X7R
50 50 50 50 50 50 16
0603 (X14)
0805 (X15)
1206 (X18
1210 (X41)
1410 (X44)
1812 (X43)
NPO 100 100 100 100 100 50 50 50
X7R
100 100 100 100 100 100 100 100 50 25 25
16 10
6.3
X5R
16 10
10 10
NPO
100 100 100 100 100 100 100 50
X7R
100 100 100 100 100 100 100 100 50 50
50 25 10
NPO
VOLTAGE
RATINGS
X7R
6.3 = 6.3 VDC
10 = 10 VDC
X7R
16 = 16 VDC
25 = 25 VDC
X7R
50 = 50 VDC
100 = 100 VDC
X7R
500 = 500 VDC
100
100 100 100
100 100
16 16
10
500
100
100 100
25 16
500
100
500
100
Contact factory for part combinations not shown.
Filtering capacitance is specified as Line-to-Ground ( Terminal A or B to G) Power Bypass capacitance is specified Power-to-Ground (A + B to G)
Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 .
HOW TO ORDER X2Y^® FILTER & DECOUPLING CAPACITORS
P/N written: 101X14W102MV4T
100
VOLTAGE
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
501 = 500 V
X14
SIZE
X07=0402
X14=0603
X15=0805
X18=1206
X41=1210
X44=1410
X43=1812
W
102
M
V
4
T
DIELECTRIC CAPACITANCE TOLERANCE
TERMINATION
N = NPO
W = X7R
X = X5R
1st two digits are
M = ± 20% V = NI Barrier with 100%
significant; third digit * D = ± 0.50 pF
Tin Plating (Matte)
denotes number of
zeros, R = decimal. ^{*Values < 10 pF only}
F = Polyterm
102 = 1000 pF
flexible termination
104 = 0.10 µF
5R6 = 5.6pF
T = SnPb
MARKING
4 = Unmarked
(Not available)
PACKING
E =Embossed 7”
T =Punched 7”
No code = bulk
Tape specs.
per EIA RS481
X2Y® technology patents and registered trademark under license from X2Y ATTENUATORS, LLC
10
www.johanson dielectrics.com