JHB7036A Datasheet, PDF (35/36 Pages) Jewel Hill Electronic – SPECIFICATIONS FOR LCD MODULE

JEWEL HILL ELECTRONIC CO.,LTD.
No
Item
Criterion
AQL
Symbols:
x: Chip length y: Chip width
k: Seal width
t: Glass thickness
l: Electrode pad length
1 Protrusion over terminal
1.1 Chip on electrode pad:
z: Chip thickness
a: LCD side length
z: Chip thickness y: Chip width
X: Chip length
0<z<=t
Y<=0.5mm
X<=1/8a
1.2 Non-conductive portion:
Glass
11
2.5
crack
z: Chip thickness y: Chip width
X: Chip length
0<z<=t
Y<=L
X<=1/8a
If the chipped area touches the ITO terminal, over 2/3 if the ITO must remain
and be inspected according to electrode terminal specifications.
If the product will be heat sealed by the customer, the alignment mark must
not be damaged.
1.3 Substrate protuberance and internal crack:
Y: width
Y<=1/3L
X: length
X<=a
1 Illumination source flickers when lit.
0.65
Backlight 2 Spots or scratches that appear when lit must be judged. Using LCD spots,
12
2.5
elements
lines and contamination standards.
3 Backlight doesn’t light or color is wrong.
0.65
JHB7036A VER: 01.01
- 34 -
Issue date: 2013-08-01