CPC7594 Datasheet, PDF (9/20 Pages) Clare, Inc. – Line Card Access Switch

INTEGRATED CIRCUITS DIVISION
CPC7594
1.7 Digital I/O Electrical Specifications
Parameter
Test Conditions
Symbol Minimum Typical Maximum
Unit
Input Characteristics
Input voltage, Logic low
Input voltage, Logic high
Input voltage falling
Input voltage rising
V_IL
0.8
1.0
-
V
V_IH
1.7
2.0
Input leakage current,
IN_RINGING and IN_TEST, V_DD = 5.5 V, V_BAT = -75 V, V_HI = 2.4 V
I_IH
-
0.1
1
A
Logic high
Input leakage current,
IN_RINGING and IN_TEST, V_DD = 5.5 V, V_BAT = -75 V, V_IL = 0.4 V
I_IL
-
0.1
1
A
Logic low
Input leakage current,
LATCH Logic high
V_DD = 4.5 V, V_BAT = -75 V, V_IH = 2.4 V
I_IH
7
19
-
A
LATCH Pull-up
Minimum Load
V_DD = 4.5 V, V_BAT = -75 V, I_IN = -10 A _{Logic = High}
True
Latch input transitions to logic high.
Input leakage current,
LATCH Logic low
V_DD = 5.5 V, V_BAT = -75 V, V_IL = 0.4 V
I_IL
-
46
125
A
Input leakage current,
T_SD Logic high
V_DD = 5.5 V, V_BAT = -75 V, V_IH = 2.4 V
I_IH
10
16
30
A
Input leakage current,
T_SD Logic low
V_DD = 5.5 V, V_BAT = -75 V, V_IL = 0.4 V
I_IL
10
16
30
A
Output Characteristics
Output voltage,
T_SD Logic high
V_DD = 5.5 V, V_BAT = -75 V, I_TSD = A V_{TSD_off}
2.4
V_DD
-
V
Output voltage,
T_SD Logic low
V_DD = 5.5 V, V_BAT = -75 V, I_TSD = mA V_{TSD_on}
-
0
0.4
V
1.8 Voltage and Power Specifications
Parameter
Test Conditions
Symbol Minimum Typical Maximum
Unit
Voltage Requirements
V_DD
-
V_DD
4.5
5.0
5.5
V
V_BAT1
-
V_BAT
-19
-48
-72
V
1_{VBAT is used only for internal protection circuitry. If VBAT rises above-10 V, the device will enter the all-off state and will remain in the all-off state until the battery}
drops below approximately -15 V
Power Specifications
Power consumption
V_DD = 5 V, V_BAT = -48 V,
Measure I_DD and I_BAT,
Talk and All-Off States
P
-
5.5
10
mW
All other states
P
-
6.5
10
mW
V_DD = 5 V, V_BAT = -48 V
V_DD current
Talk and All-Off states
I_DD
1.1
2.0
mA
Ringing and Test states
I_DD
-
1.3
2.0
mA
V_BAT current
V_DD = 5 V, V_BAT = -72 V, All states
I_BAT
-
0.1
10
A
R04
www.ixysic.com
9