031-1007-054 Datasheet, PDF (38/62 Pages) ITT Industries – Ensuring over 20 years of mission critical communication between two worlds across 250,000,000 milies

Grommet D
GD*
10˚TYP.
+
B•
B'
D'
+
D• E
C
A
Front
Standard Shell Dimensions
M
L
K
J
X MAX.
H+
G
MAX. OVER
GROMMET
+
TWO HOLES
.120 +_ .005 (3.05 +_ 0.13) DIA.
Rear
Shell with Float Dimensions
10˚TYP.
C
B•
B'
C
A
Front
D'
D• ^E
.031 (0.79)
+_ .005 (0.13)
.049 (1.24)
MAX.
.089 (2.26) +_ .003 (0.08)
DIA.
.130 (3.30) MAX.
.031 (0.79) TOTAL
DIAMETRICAL FLOAT
WASHER
RIVET
OVERALL FREE
FLOAT .004 - .012
(0.10) - (0.30)
Y-Float Mount
G
MAX. OVER
GROMMET
TWO HOLES
.089 (2.26) +_ .003 (0.08)
Rear
H
Over
Shell
It is recommended that only one assembly, either pin or socket, be float mounted. For front panel mounting use reverse float mounted.
A
B•
B’
C
D•
D’
E
H
J
K
Shell Size ±.015 ±.005 ±.005 ±.005 ±.005 ±.005 ±.015
G
±.010 ±.010 ±.006
(0.38)
(0.13) (0.13) (0.12) (0.13) (0.12) (0.38) Max. (0.25) (0.25) (0.13)
GDE-9P 1.213 (30.81) — .666 (16.91) .984 (24.99) — .329 (8.36) .494 (12.55) .750 (19.05) .422 (10.72)
GDE-9S 1.213 (30.81) .643 (16.33) — .984 (24.99) .311 (7.90) — .494 (12.55) .750 (19.05) .422 (10.72)
GDA-15P 1.541 (39.14) — .994 (25.24) 1.312 (33.32) — .329 (8.36) .494 (12.55) 1.093 (27.76) .422 (10.72)
GDA-15S 1.541 (39.14) .971 (24.66) — 1.312 (33.32) .311 (7.90) — .494 (12.55) 1.093 (27.76) .422 (10.72)
GDB-25P 2.088 (53.03) — 1.534 (38.96)1.852 (47.04) — .329 (8.36) .494 (12.55) 1.625 (41.28) .422 (10.72)
GDB-25S 2.088 (53.03) 1.511 (38.38) — 1.852 (47.04) .311 (7.90) — .494 (12.55) 1.625 (41.28) .422 (10.72)
GD-37P 2.729 (19.32)
2.182 (55.42) 2.50 (63.50)
.329 (8.36) .494 (12.55) 2.270 (57.66) .422 (10.72)
GD-37S 2.729 (19.32) 2.159 (54.84)
2.50 (63.50) .311 (7.90)
.494 (12.55) 2.270 (57.66) .422 (10.72)
GDD-50P 2.635 (66.92) — 2.079 (52.81)2.406 (61.11) — .411 (11.20) .605 (15.37) 2.162 (54.91) .534 (13.56)
GDD-50S 2.635 (66.92) 2.064 (52.42) — 2.406 (61.11) .423 (10.74) — .605 (15.37) 2.162 (54.91) .534 (13.56)
.030 (0.76)
.030 (0.76)
.030 (0.76)
.030 (0.76)
.039 (0.99)
.030 (0.76)
.039 (0.99)
.030 (0.76)
.039 (0.99)
.030 (0.76)
.235 (5.97)
.243 (6.17)
.235 (5.97)
.243 (6.17)
.230 (5.84)
.243 (6.17)
.230 (5.84)
.243 (6.17)
.230 (5.84)
.243 (6.17)
L
M
±.010 ±.085
X
(0.25) (0.13)
Max.
.045 (1.14) .422 (10.72) .718 (18.24)
.045 (1.14) .429 (10.90) .718 (18.24)
.045 (1.14) .422 (10.72) .718 (18.24)
.045 (1.14) .429 (10.90) .718 (18.24)
.060 (1.52) .426 (10.82) .718 (18.24)
.045 (1.14) .429 (10.90) .718 (18.24)
.060 (1.52) .426 (10.82) .718 (18.24)
.045 (1.14) .429 (10.90) .718 (18.24)
.060 (1.52) .426 (10.82) .718 (18.24)
.045 (1.14) .429 (10.90) .718 (18.24)
*dimensions B, D, and H are measured as
outside dimensions at the bottom of draw.
NOTE: B• and D• are the outside dimensions for socket side, B’ and D’ are
the inside dimensions for pin side.
High Density Layouts available.
C-38
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com