English
Language : 

IS62WV102416DALL Datasheet, PDF (4/15 Pages) Integrated Silicon Solution, Inc – Industrial and Automotive temperature support
IS62/65WV102416DALL
IS62/65WV102416DBLL
ABSOLUTE MAXIMUM RATINGS AND OPERATING RANGE
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
Parameter
Value
Unit
Vterm
Terminal Voltage with Respect to GND
–0.2 to +3.9(VDD+0.3V)
V
tBIAS
Temperature Under Bias
–55 to +125
C
VDD
VDD Related to GND
tStg
Storage Temperature
–0.2 to +3.9(VDD+0.3V)
V
–65 to +150
C
IOUT
DC Output Current (LOW)
20
mA
Notes:
1. Stress greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
OPERATING RANGE(1)
Range
Device Marking
Ambient Temperature VDD (min) VDD (typ) VDD (max)
Commercial IS62WV102416DALL 0C to +70C
1.65V
1.8V
1.98V
Industrial
IS62WV102416DALL -40C to +85C
1.65V
1.8V
1.98V
Automotive
IS65WV102416DALL -40C to +125C
1.65V
1.8V
1.98V
Commercial IS62WV102416DBLL 0C to +70C
2.2V
3.3V
3.6V
Industrial
IS62WV102416DBLL -40C to +85C
2.2V
3.3V
3.6V
Automotive
IS65WV102416DBLL -40C to +125C
2.2V
3.3V
3.6V
Note:
1. Full device AC operation assumes a 100 µs ramp time from 0 to Vcc(min) and 200 µs wait time after Vcc stabilization.
PIN CAPACITANCE (1)
Parameter
Symbol Test Condition
Input capacitance
DQ capacitance (IO0–IO15)
CIN
CI/O
TA = 25°C, f = 1 MHz, VDD = VDD(typ)
Note:
1. These parameters are guaranteed by design and tested by a sample basis only.
Max
10
10
THERMAL CHARACTERISTICS (1)
Parameter
Thermal resistance from junction to ambient (airflow = 1m/s)
Thermal resistance from junction to case
Note:
1. These parameters are guaranteed by design and tested by a sample basis only.
Symbol
RθJA
RθJC
Rating
43.8
7.7
Units
pF
pF
Units
°C/W
°C/W
Integrated Silicon Solution, Inc.- www.issi.com
4
Rev. A
12/12/2014