IS62WV102416DALL Datasheet, PDF (1/15 Pages) Integrated Silicon Solution, Inc – Industrial and Automotive temperature support

IS62/65WV102416DALL
IS62/65WV102416DBLL
1Mx16 LOW VOLTAGE,
ULTRA LOW POWER & LOW POWER CMOS STATIC RAM
JANUARY 2015
KEY FEATURES
 High-speed access time: 45ns, 55ns.
 CMOS low power operation
– 25 µA (typical) CMOS standby
 CMOS for optimum speed and power and TTL
compatible interface levels
 Single power supply
– 1.65V~1.98V VDD
(IS62/65WV102416DALL)
– 2.2V~3.6V VDD
(IS62/65WV102416DBLL)
 Fully static operation: no clock or refresh
required
 Industrial and Automotive temperature support
DESCRIPTION
The ISSI IS62/65WV102416DALL,
IS62/65WV102416DBLL are ULTRA LOW POWER
CMOS 16Mbit static RAMs organized as 1M words
by 16 bits. It is fabricated using ISSI's high-
performance CMOS technology. This highly reliable
process coupled with innovative circuit design
techniques, yields high-performance and low power
consumption devices. The IS62WV102416DALL/
DBLL and IS65WV102416DALL/DBLL are
packaged in 48-Pin TSOP (TYPE I).
BLOCK DIAGRAM
A0-19
A20
DECODER
I/O0-7
I/O8-14
I/O15
IO15
CONTROL CIRCUIT
, CS2
MEMORY ARRAY
(1024KX16)
(2048KX8)
COLUMN I/O
Copyright © 2014 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time
without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to
obtain the latest version of this device specification before relying on any published information and before placing orders for products.
Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can
reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such
applications unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that:
a.) the risk of injury or damage has been minimized;
b.) the user assume all such risks; and
c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances
Integrated Silicon Solution, Inc.- www.issi.com
1
Rev. A
12/12/2014