IS62WV2568DALL Datasheet, PDF (3/14 Pages) Integrated Silicon Solution, Inc – TTL compatible interface levels

IS62/65WV2568DALL,IS62/65WV2568DBLL
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Symbol
Parameter
Value
Unit
Vterm
Terminal Voltage with Respect to GND
–0.2 to Vcc+0.3
V
Tstg
Storage Temperature
–65 to +150
°C
Pt
Power Dissipation
1.0
W
Note:
1. Stress greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reli-
ability.
OPERATING RANGE (Vcc)
Range
Commercial
Industrial
Automotive (A3)
Ambient Temperature
0°C to +70°C
–40°C to +85°C
–40°C to +125°C
IS62/65WV2568DALL
1.8V ± 10%
1.8V ± 10%
1.8V ± 10%
IS62/65WV2568DBLL
2.5V - 3.6V
2.5V - 3.6V
2.5V - 3.6V
DC ELECTRICAL CHARACTERISTICS (Over Operating Range)
Symbol Parameter
Test Conditions
Vcc
Voh
Output HIGH Voltage
Ioh = -0.1 mA
Ioh = -1 mA
1.8V ± 10%
2.5-3.6V
Vol
Output LOW Voltage
Iol = 0.1 mA
Iol = 1.0 mA
1.8V ± 10%
2.5-3.6V
Vih
Input HIGH Voltage

1.8V ± 10%
2.5-3.6V
Vil⁽¹⁾
Input LOW Voltage
1.8V ± 10%
2.5-3.6V
Ili
Input Leakage
GND ≤ Vin ≤ Vcc
Ilo
Output Leakage
GND ≤ Vout ≤ Vcc, Outputs Disabled
Notes:
For IS62/65WV2568DALL:
Vil (min.) = -1.0V AC (pluse width < 10ns). Not 100% tested.
Vih (max.) = Vcc + 1.0V AC; (pluse width < 10ns). Not 100% tested.
For IS62/65WV2568DBLL:
Vil (min.) = -2.0V AC (pluse width < 10ns). Not 100% tested.
Vih (max.) = Vcc + 2.0V AC; (pluse width < 10ns). Not 100% tested.
Min.
1.4
2.2
—
—
1.4
2.2
–0.2
–0.2
–1
–1
Max.
—
—
0.2
0.4
Vcc + 0.2
Vcc + 0.3
0.4
0.6
1
1
Unit
V
V
V
V
V
V
V
V
µA
µA
Integrated Silicon Solution, Inc. — www.issi.com
3
Rev.  C
05/24/2013