IS62C256AL Datasheet, PDF (1/12 Pages) Integrated Silicon Solution, Inc – 32K x 8 LOW POWER CMOS STATIC RAM

IS65C256AL
IS62C256AL
32K x 8 LOW POWER CMOS STATIC RAM
ISSI^®
MARCH 2006
FEATURES
• Access time: 25 ns, 45 ns
• Low active power: 200 mW (typical)
• Low standby power
— 150 µW (typical) CMOS standby
— 15 mW (typical) operating
• Fully static operation: no clock or refresh
required
• TTL compatible inputs and outputs
• Single 5V power supply
• Lead-free available
• Industrial and Automotive temperatures avail-
able
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION
The ISSI IS62C256AL/IS65C256AL is a low power,
32,768 word by 8-bit CMOS static RAM. It is fabricated
using ISSI's high-performance, low power CMOS tech-
nology.
When CE is HIGH (deselected), the device assumes a
standby mode at which the power dissipation can be
reduced down to 150 µW (typical) at CMOS input levels.
Easy memory expansion is provided by using an active
LOW Chip Select (CE) input and an active LOW Output
Enable (OE) input. The active LOW Write Enable (WE)
controls both writing and reading of the memory.
The IS62C256AL/IS65C256AL is pin compatible with
other 32Kx8 SRAMs in plastic SOP or TSOP (Type I)
package.
A0-A14
VDD
GND
I/O0-I/O7
DECODER
32K X 8
MEMORY ARRAY
I/O
DATA
CIRCUIT
COLUMN I/O
CE
OE
CONTROL
CIRCUIT
WE
Copyright © 2006 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no liability
arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the latest version of this device specification before relying on any
published information and before placing orders for products.
Integrated Silicon Solution, Inc. — www.issi.com — 1-800-379-4774
1
Rev. A
03/17/06