SM-BGA-9052 Datasheet, PDF (4/4 Pages) Ironwood Electronics. – Low and stable contact resistance for reliable production yield

22
21
7
6
14
16
15
17
9
8
1
18
2
12
19
3
4
5
13
10
11
20
Description: Skt, Insulation Plate, Pin Det
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9052 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 150.03
ITEM
NO.
1
2
3
DESCRIPTION
CG Socket Base 23x23mm
Compression Plate
IC Guide 23x23mm IC
4 Ball Guide 23mm IC 0.65mm pitch 34x34 array
Material
7075-T6 Aluminum Alloy
7075-T6 Aluminum Alloy
Torlon 4203
Kapton Polyimide/Cirlex
5 SM Contactor 23x23mm 0.65mm pitch BGA911
Silmat
6
Socket Lid for M18 screw
7075-T6 Aluminum Alloy
7
Heat sink compression screw M18
7075-T6 Aluminum Alloy
8
IC Frame
FR4 Standard
9
IC Frame 23mm IC
10
Custom insulation plate for 23x23mm IC
FR4 Standard
FR4 High temp
11
Backing PLate 23x23mm IC
7075-T6 Alumium Alloy
12
Test Chip BGA911
Material <not specified>
13 Test PCB 0.65mm pitch 23x23mm BGA911
FR4 Standard
14
Screw, M3 x 12mm, Low Head Cap, SS
18-8 Stainless Steel
15
Precision Compression Spring, Zinc-Plated
Music Wire, 1/2" Length, .12" OD, .016" Wire
Zinc Plated Music Wire
16
Spring Clamshell lid assembly
Steel Music Wire
17
Latch
7075-T6 Aluminum Alloy
18
Hinge Pin and Snap Ring, 3mm OD, 30mm
long, 1045 Stl, Blk Oxide
AISI 1045 Steel, cold drawn
19
Dowel Pin, 1/32" x 3/16", SS
20
#0-80 x 0.5, SH Cap Screw
Chrome Stainless Steel
Alloy Steel
21 Fan: 30x30x10mm 5V 5.5 CFM 0.6 watts
Material <not specified>
22
Screw, #4-40 X 1", Cap
Alloy Steel
orientation
mark
13.40
1.70 (x4)
30.725
22.86
25.725
1.5875
STATUS: Released
ENG: S. Huang
FILE: SM-BGA-9052 Dwg
INSULATION PLATE
SHEET: 4 OF 4
DRAWN BY: M. Raske
DATE: 8/28/2014
REV. A
SCALE: 1:1