|
JANSR2N7392 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET THRU - HOLE ( TO - 254AA ) | |||
|
◁ |
IRHM7460SE
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 500
âBVDSS/âTJ Temperature Coefficient of Breakdown Â
Voltage
RDS(on)
Static Drain-to-Source On-State
Â
Resistance
Â
VGS(th)
Gate Threshold Voltage
2.5
gfs
Forward Transconductance
6.0
IDSS
Zero Gate Voltage Drain Current
Â
Â
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Â
Gate-to-Source Leakage Reverse
Â
Total Gate Charge
Â
Gate-to-Source Charge
Â
Gate-to-Drain (ÂMillerÂ) Charge
Â
Turn-On Delay Time
Â
Rise Time
Â
Turn-Off Delay Time
Â
Fall Time
Â
Total Inductance
Â
Ciss
Input Capacitance
Â
Coss
Output Capacitance
Â
Crss
Reverse Transfer Capacitance
Â
Typ Max Units
ÂÂ V
0.66  V/°C
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
 0.32
 0.36
 4.5
ÂÂ
 50
 250
 100
 -100
 180
 30
 95
 29
 93
 90
 59
6.8 Â
3500 Â
730 Â
260 Â
â¦
V
S( )
µA
nA
nC
ns
VGS = 12V, ID = 11.7A â
VGS = 12V, ID = 18A
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 11.7A â
VDS= 400V ,VGS=0V
VDS = 400V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 18A
VDS = 250V
VDD =250V, ID =18A,
VGS =12V, RG = 2.35â¦
nH Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
VGS = 0V, VDS = 25V
pF
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
Continuous Source Current (Body Diode) Â Â 18
A
ISM Pulse Source Current (Body Diode) â
  72
Test Conditions
VSD Diode Forward Voltage
trr Reverse Recovery Time
QRR Reverse Recovery Charge
  1.8 V
  800 nS
  16 µC
Tj = 25°C, IS = 18A, VGS = 0V â
Tj = 25°C, IF = 18A, di/dt ⤠100A/µs
VDD ⤠50V â
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthCS
RthJA
Junction-to-Case
Case-to-Sink
Junction-to-Ambient
Min Typ Max Units
  0.50
 0.21  °C/W
  48
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com
|
▷ |