JANSR2N7381 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET THRU-HOLE (TO-257AA)

IRHY7230CM, JANSR2N7381
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Pre-Irradiation
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 200
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
—
VGS(th)
Gate Threshold Voltage
2.0
gfs
Forward Transconductance
2.5
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Ciss
Input Capacitance
—
Coss
Output Capacitance
—
Crss
Reverse Transfer Capacitance
—
Typ Max Units
—— V
0.23 — V/°C
— 0.40 Ω
— 0.49
— 4.0 V
— — S( )
— 25 _µA
— 250
— 100
nA
— -100
— 50
— 10 nC
— 25
— 35
— 75
ns
— 70
— 60
7.0 — _nH
1200 —
250 — pF
63 —
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
VGS = 12V, ID = 6.0A _Ã
VGS = 12V, ID = 9.4A
VDS = VGS, ID = 1.0mA
VDS > =15V, IDS = 6.0A Ã
VDS= 160V ,VGS = 0V
VDS = 160V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 9.4A
VDS = 100V
VDD = 100V, ID = 9.4A
VGS =12V, RG = 7.5Ω
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
Continuous Source Current (Body Diode) — — 9.4 _A
ISM Pulse Source Current (Body Diode) À
— — 37.6
VSD Diode Forward Voltage
— — 1.4 V
trr Reverse Recovery Time
— — 460 ns
QRR Reverse Recovery Charge
— — 2.4 µC
Tj = 25°C, IS = 9.4A, VGS = 0V Ã
Tj = 25°C, IF = 9.4A, di/dt ≤ 100A/µs
VDD ≤ 50V Ã
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max Units
— — 1.67 _°C/W
— — 80
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com