|
IRFPC50LC Datasheet, PDF (2/8 Pages) International Rectifier – Power MOSFET(Vdss=600V, Rds(on)=0.60ohm, Id=11A) | |||
|
◁ |
Previous Datasheet
Index
Next Data Sheet
IRFPC50LC
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
V(BR)DSS Drain-to-Source Breakdown Voltage
âV(BR)DSS/âTJ Breakdown Voltage Temp. Coefficient
RDS(ON)
VGS(th)
Static Drain-to-Source On-Resistance
Gate Threshold Voltage
gfs
Forward Transconductance
IDSS
Drain-to-Source Leakage Current
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
LD
Internal Drain Inductance
LS
Internal Source Inductance
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Min. Typ. Max. Units
Conditions
600 âââ âââ V VGS = 0V, ID = 250µA
âââ 0.59 âââ V/°C Reference to 25°C, I D = 1mA
âââ âââ 0.60 ⦠VGS = 10V, ID = 6.6A
2.0 âââ 4.0 V VDS = VGS, ID = 250µA
7.0 âââ âââ S VDS = 100V, ID = 6.6A
âââ âââ 25 µA VDS = 600V, VGS = 0V
âââ âââ 250
VDS = 480V, VGS = 0V, TJ = 125°C
âââ âââ 100
nA
âââ âââ -100
VGS = 20V
VGS = -20V
âââ âââ 84
ID = 11A
âââ âââ 18 nC VDS = 360V
âââ âââ 36
VGS = 10V, See Fig. 6 and 13
âââ 17 âââ
VDD = 300V
âââ 32 âââ ns ID = 11A
âââ 41 âââ
RG = 6.2â¦
âââ 26 âââ
RD = 30â¦, See Fig. 10
Between lead,
âââ 5.0 âââ
nH 6mm (0.25in.)
from package
âââ 13 âââ
and center of die contact
âââ 2300 âââ
VGS = 0V
âââ 270 âââ pF VDS = 25V
âââ 28 âââ
Æ = 1.0MHz, See Fig. 5
Source-Drain Ratings and Characteristics
Parameter
IS
Continuous Source Current
(Body Diode)
ISM
Pulsed Source Current
(Body Diode)
VSD
Diode Forward Voltage
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
ton
Forward Turn-On Time
Min. Typ. Max. Units
Conditions
MOSFET symbol
âââ âââ 11
showing the
A
integral reverse
âââ âââ 44
p-n junction diode.
âââ âââ 1.4 V TJ = 25°C, I S = 11A, VGS = 0V
âââ 590 890 ns TJ = 25°C, I F = 11A
âââ 4.5 6.8 µC di/dt = 100A/µs
Intrinsic turn-on time is negligible (turn-on is dominated by L S+LD)
Notes:
Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 )
VDD = 25V, starting T J = 25°C, L = 13mH
RG = 25â¦, IAS = 11A. (See Figure 12)
ISD ⤠11A, di/dt ⤠100A/µs, V DD ⤠V(BR)DSS,
TJ ⤠150°C
Pulse width ⤠300µs; duty cycle ⤠2%.
To Order
|
▷ |