IRF7MS2907 Datasheet, PDF (2/7 Pages) International Rectifier – HEXFET POWER MOSFET THRU-HOLE (Low-ohmic TO-254AA)

IRF7MS2907
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min Typ Max Units
Test Conditions
BVDSS
Drain-to-Source Breakdown Voltage
75 — —
V
VGS = 0V, ID = 250µA
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — 0.087 — V/°C Reference to 25°C, ID = 1.0mA
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
— — 0.0055 Ω
VGS = 10V, ID = 45A _➃
VGS(th)
gfs
IDSS
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
2.0 — 4.0 V
70 — — S ( )
VDS = VGS, ID = 250µA
VDS > 15V, IDS = 45A ➃
—
— 20 _µA
— — 250
VDS= 75V ,VGS=0V
VDS = 60V,
VGS = 0V, TJ = 125°C
— — 100
nA
— — -100
— — 375
VGS = 20V
VGS = -20V
VGS = 10V, ID = 45A
— — 60 nC
— — 150
VDS = 60V
— — 40
—
— 135 _ns
— — 175
VDD = 38V, ID = 45A
VGS = 10V, RG = 1..2Ω
— — 75
—
6.8 —
nH ^{Measured from Drain lead (6mm /0.25in.}
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 12060 —
— 2280 — pF
— 605 —
VGS = 0V, VDS =25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
Continuous Source Current (Body Diode) — — 45* _A
ISM Pulse Source Current (Body Diode) ➀
— — 180
VSD Diode Forward Voltage
— — 1.0 V
trr Reverse Recovery Time
— — 175 ns
QRR Reverse Recovery Charge
— — 850 nC
Tj = 25°C, IS = 45A, VGS = 0V ➃
Tj = 25°C, IF = 45A, di/dt ≤ 100A/µs
VDD ≤ 25V ➃
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC
Junction-to-Case
Min Typ Max Units
— — 0.6 °C/W
Test Conditions
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com