IRFR3710ZTRPBF Datasheet, PDF (12/12 Pages) International Rectifier – Advanced Process Technology

IRFR/U3710ZPbF & IRFU3710Z-701PbF
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRR TRL
16.3 ( .641 )
15.7 ( .619 )
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
FEED DIRECTION
8.1 ( .318 )
7.9 ( .312 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
FEED DIRECTION
13 INCH
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
16 mm
Notes:
 Repetitive rating; pulse width limited by
„ C_oss eff. is a fixed capacitance that gives the same charging time
max. junction temperature. (See fig. 11).
as C_oss while V_DS is rising from 0 to 80% V_DSS .
‚ Limited by T_Jmax, starting T_J = 25°C, L = 0.28mH … Limited by T_Jmax , see Fig.12a, 12b, 15, 16 for typical repetitive
R_G = 25Ω, I_AS = 33A, V_GS =10V. Part not
avalanche performance.
recommended for use above this value.
† This value determined from sample failure population. 100%
ƒ Pulse width ≤ 1.0ms; duty cycle ≤ 2%.
tested to this value in production.
‡ When mounted on 1" square PCB (FR-4 or G-10 Material) .
For recommended footprint and soldering techniques refer to
application note #AN-994.
Data and specifications subject to change without notice.
IRFR/U3710Z has been designed and qualified for the Industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: [phone]
TAC Fax: [phone]
Visit us at www.irf.com for sales contact information.09/2010
12
www.irf.com