IRFB17N20DPBF Datasheet, PDF (11/12 Pages) International Rectifier – HEXFET Power MOSFET

IRFB/IRFS/IRFSL17N20DPbF
D²Pak Tape & Reel Infomation
Dimensions are shown in millimeters (inches)
TRR
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
FEED DIRECTION 1.85 (.073)
1.65 (.065)
TRL
10.90 (.429)
10.70 (.421)
1.60 (.063)
1.50 (.059)
11.60 (.457)
11.40 (.449)
15.42 (.609)
15.22 (.601)
1.75 (.069)
1.25 (.049)
16.10 (.634)
15.90 (.626)
0.368 (.0145)
0.342 (.0135)
24.30 (.957)
23.90 (.941)
4.72 (.136)
4.52 (.178)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
60.00 (2.362)
MIN.
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
26.40 (1.039)
24.40 (.961)
3
30.40 (1.197)
MAX.
4
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature.
„ Pulse width ≤ 300µs; duty cycle ≤ 2%.
R_G = 25Ω, I_AS = 9.8A.
‚ Starting T_J = 25°C, L = 5.0mH
… C_oss eff. is a fixed capacitance that gives the same charging time
as C_oss while V_DS is rising from 0 to 80% V_DSS
ƒ I_SD ≤ 9.8A, di/dt ≤ 110A/µs, V_DD ≤ V_(BR)DSS,
† This is only applied to TO-220AB package
T_J ≤ 175°C
‡ This is applied to D²Pak, when mounted on 1" square PCB ( FR-4 or G-10 Material ).
For recommended footprint and soldering techniques refer to application note #AN-994.
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: [phone]
TAC Fax: [phone]
Visit us at www.irf.com for sales contact information.06/04
www.irf.com
11