CD4063BMS Datasheet, PDF (8/8 Pages) Intersil Corporation – CMOS 4-Bit Magnitude Comparator

CD4063BMS
Typical Performance Characteristics (Continued)
AMBIENT TEMPERATURE (T_A) = +25^oC
200
SUPPLY VOLTAGE (VDD) = 5V
150
100
10V
15V
50
0
0
20
40
60
80
100
LOAD CAPACITANCE (CL) (pF)
FIGURE 9. TYPICAL TRANSITION TIME vs LOAD CAPACITANCE
10⁴
6
4
AMBIENT TEMPERATURE (T_A) = +25^oC
2
10³
6
4
SUPPLY VOLTAGE (VDD) = 15V
LOAD CAPACITANCE (CL) = 50pF
2
10²
6
4
2
10
6
4
10V, 50pF
10V, 15pF
5V, 50pF
2
1
2 4 68 2 4 68 2 4 68 2 4 68 2 4 68
0.1
1
10
10²
10³
INPUT FREQUENCY (f) (kHz)
FIGURE 10. TYPICAL POWER DISSIPATION vs FREQUENCY
Chip Dimensions and Pad Layout
Dimensions in parenthesis are in millimeters and are
derived from the basic inch dimensions as indicated.
Grid graduations are in mils (10^-3 inch).
METALLIZATION: Thickness: 11kÅ − 14kÅ, AL.
PASSIVATION: 10.4kÅ - 15.6kÅ, Silane
BOND PADS: 0.004 inches X 0.004 inches MIN
DIE THICKNESS: 0.0198 inches - 0.0218 inches
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
965