DG201A_01 Datasheet, PDF (7/7 Pages) Intersil Corporation – Quad SPST, CMOS Analog Switches

DG201A, DG202
Small Outline Plastic Packages (SOIC)
N
INDEX
AREA
H
E
-B-
0.25(0.010) M B M
123
-A-
D
SEATING PLANE
A
L
h x 45^o
-C-
µα
e
A1
C
B
0.10(0.004)
0.25(0.010) M C A M B S
NOTES:
1. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of
Publication Number 95.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension “D” does not include mold flash, protrusions or gate burrs.
Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006
inch) per side.
4. Dimension “E” does not include interlead flash or protrusions. Interlead
flash and protrusions shall not exceed 0.25mm (0.010 inch) per side.
5. The chamfer on the body is optional. If it is not present, a visual index
feature must be located within the crosshatched area.
6. “L” is the length of terminal for soldering to a substrate.
7. “N” is the number of terminal positions.
8. Terminal numbers are shown for reference only.
9. The lead width “B”, as measured 0.36mm (0.014 inch) or greater above
the seating plane, shall not exceed a maximum value of 0.61mm (0.024
inch)
10. Controlling dimension: MILLIMETER. Converted inch dimensions are
not necessarily exact.
M16.3 (JEDEC MS-013-AA ISSUE C)
16 LEAD WIDE BODY SMALL OUTLINE PLASTIC PACKAGE
INCHES
MILLIMETERS
SYMBOL MIN
MAX
MIN
MAX NOTES
A
0.0926 0.1043 2.35
2.65
-
A1
0.0040 0.0118 0.10
0.30
-
B
0.013 0.0200 0.33
0.51
9
C
0.0091 0.0125 0.23
0.32
-
D
0.3977 0.4133 10.10 10.50
3
E
0.2914 0.2992 7.40
7.60
4
e
0.050 BSC
1.27 BSC
-
H
0.394 0.419 10.00 10.65
-
h
0.010 0.029
0.25
0.75
5
L
0.016 0.050
0.40
1.27
6
N
16
16
7
α
0^o
8^o
0^o
8^o
-
Rev. 0 12/93
All Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at website www.intersil.com/design/quality/iso.asp
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.
Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. How-
ever, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use.
No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
2401 Palm Bay Rd.
Palm Bay, FL 32905
TEL: [phone]
FAX: [phone]
EUROPE
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: [phone]
FAX: [phone]
ASIA
Intersil Ltd.
8F-2, 96, Sec. 1, Chien-kuo North,
Taipei, Taiwan 104
Republic of China
TEL: [phone]
FAX: [phone]
7