HCTS147MS Datasheet, PDF (6/10 Pages) Intersil Corporation – Radiation Hardened 10-to-4 Line Priority Encoder

Specifications HCTS147MS
TABLE 7. TOTAL DOSE IRRADIATION
CONFORMANCE
GROUPS
METHOD
TEST
PRE RAD
POST RAD
Group E Subgroup 2
5005
1, 7, 9
Table 4
NOTE:
1. Except FN test which will be performed 100% Go/No-Go.
READ AND RECORD
PRE RAD
POST RAD
1, 9
Table 4 (Note 1)
TABLE 8. STATIC BURN-IN AND DYNAMIC BURN-IN TEST CONNECTIONS
OSCILLATOR
OPEN
GROUND
1/2 VCC = 3V ± 0.5V
VCC = 6V ± 0.5V
50kHz
25kHz
STATIC BURN-IN I TEST CONNECTIONS (Note 1)
6, 7, 9, 14, 15
1 - 5, 8, 10 - 13
-
16
-
-
STATIC BURN-IN II TEST CONNECTIONS (Note 1)
6, 7, 9, 14, 15
8
-
1 - 5, 10 - 13, 16
-
-
DYNAMIC BURN-IN TEST CONNECTIONS (Note 2)
15
8
6, 7, 9, 14
16
4, 5, 10, 11, 13
1-3, 12
NOTES:
1. Each pin except VCC and GND will have a resistor of 10KΩ ± 5% for static burn-in.
2. Each pin except VCC and GND will have a resistor of 1KΩ ± 5% for dynamic burn-in.
TABLE 9. IRRADIATION TEST CONNECTIONS
OPEN
GROUND
VCC = 5V ± 0.5V
6, 7, 9, 14, 15
8
1 - 5, 10 - 13, 16
NOTE: Each pin except VCC and GND will have a resistor of 47KΩ ± 5% for irradiation testing.
Group E, Subgroup 2, sample size is 4 dice/wafer 0 failures.
Spec Number 518608
535