HCTS147MS Datasheet, PDF (1/10 Pages) Intersil Corporation – Radiation Hardened 10-to-4 Line Priority Encoder

HCTS147MS
September 1995
Radiation Hardened
10-to-4 Line Priority Encoder
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
- Bus Driver Outputs - 15 LSTTL Loads
• Military Temperature Range: -55^oC to +125^oC
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16
TOP VIEW
I4 1
I5 2
I6 3
I7 4
I8 5
Y2 6
Y1 7
GND 8
16 VCC
15 NC
14 Y3
13 I3
12 I2
11 I1
10 I9
9 Y0
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Description
The Intersil HCTS147MS is a Radiation Hardened 10-to-4
line Priority Encoder, pin compatible with low power Schottky
TTL(LSTTL).
The HCTS147MS utilizes advanced CMOS/SOS technology
to achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family
with TTL input compatibility.
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16
TOP VIEW
I4
I5
I6
I7
I8
Y2
Y1
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
NC
Y3
I3
I2
I1
I9
Y0
The HCTS147MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER
HCTS147DMSR
HCTS147KMSR
HCTS147D/Sample
HCTS147K/Sample
HCTS147HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
530
Spec Number 518608
File Number 3063.1