English
Language : 

ISL5120 Datasheet, PDF (5/15 Pages) Intersil Corporation – Low-Voltage, Single Supply, Dual SPST, SPDT Analog Switches
◁
ISL5120, ISL5121, ISL5122, ISL5123
Electrical Specifications - 5V Supply Test Conditions: V+ = +4.5V to +5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 5),
Unless Otherwise Specified (Continued)
PARAMETER
TEST CONDITIONS
TEMP (NOTE 6)
(NOTE 6)
(°C)
MIN
TYP
MAX UNITS
Power Supply Rejection Ratio
RL = 50Ω, CL = 5pF, f = 1MHz
25
-
60
-
dB
NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
25
-
8
-
pF
COM OFF Capacitance,
CCOM(OFF)
f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
25
-
8
-
pF
COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7),
25
-
21
-
pF
ISL5120/1/2
f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7),
25
-
28
-
pF
ISL5123
POWER SUPPLY CHARACTERISTICS
Power Supply Range
Full
2.7
12
V
Positive Supply Current, I+
V+ = 5.5V, VIN = 0V or V+, all channels on or off
DIGITAL INPUT CHARACTERISTICS
Full
-1
0.0001
1
µA
Input Voltage Low, VINL
Full
-
-
0.8
V
Input Voltage High, VINH
Full
2.4
-
-
V
Input Current, IINH, IINL
V+ = 5.5V, VIN = 0V or V+
Full
-1
-
1
µA
NOTES:
4. VIN = input voltage to perform proper function.
5. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
6. Leakage parameter is 100% tested at high temp, and guaranteed by correlation at 25°C.
Electrical Specifications - 3.3V Supply
Test Conditions: V+ = +3.0V to +3.6V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 5),
Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
TEMP (NOTE 6)
(NOTE 6)
(°C)
MIN
TYP
MAX UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
ON Resistance, RON
V+ = 3V, ICOM = 1.0mA, VNO or VNC = 1.5V
Full
0
25
-
Full
-
-
V+
V
32
50
Ω
40
60
Ω
RON Matching Between Channels, V+ = 3.3V, ICOM = 1.0mA, VNO or VNC = 1.5V
∆RON
25
-
0.8
2
Ω
Full
-
1
4
Ω
RON Flatness, RFLAT(ON)
V+ = 3.3V, ICOM = 1.0mA, VNO or VNC = 0.5V, 1V, 1.5V 25
-
Full
-
6
8
Ω
7
12
Ω
NO or NC OFF Leakage Current,
INO(OFF) or INC(OFF)
V+ = 3.6V, VCOM = 1V, 3V, VNO or VNC = 3V, 1V,
(Note 7)
25
-0.1
0.01
Full
-5
-
0.1
nA
5
nA
COM OFF Leakage Current,
ICOM(OFF)
V+ = 3.6V, VCOM = 3V, 1V, VNO or VNC = 1V, 3V,
(Note 7)
25
-0.1
0.01
Full
-5
-
0.1
nA
5
nA
COM ON Leakage Current,
ICOM(ON)
V+ = 3.6V, VCOM = 1V, 3V, or VNO or VNC = 1V, 3V, or 25
-0.2
-
0.2
nA
floating, (Note 7)
Full
-10
-
10
nA
5
FN6022.6
November 17, 2004
 ▷