ISL37231 Datasheet, PDF (5/9 Pages) Intersil Corporation – 10.3125 Gb/s Retiming Dual-Channel Transceiver

ISL37231
Absolute Maximum Ratings
Supply Voltage (V_DD to GND, 1.0V Rails) . . . . . . . . . . . . . . . . . . . . . . . . 1.1V
Supply Voltage (V_DD to GND, 1.8V Rails) . . . . . . . . . . . . . . . . . . . . . . . 1.98V
1V Pin Input Voltage (AIN, BIN, XTALP) . . . . . . . . . . . . . . . . . . . . . . . . . 1.1V
1.8V Pin Input Voltage (all non 3.3V tolerant logic inputs) . . . . V_DD + 0.2V
3.3V Tolerant I/O Pin Voltage (EEWE, SCLK, SDA, URX, AUTX, AURX,
RESET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6V
ESD Ratings
Human Body Model (All Pins) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25kV
Charged Device Model (All Pins). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0kV
Machine Model (All Pins). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V
Latch-up (per JEDEC JESD78, Level 2, Class A) . . . . . . . . . . . . . . . . +85°C
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
69 Ld aQFN Package (Notes 6, 7) . . . . . . . 31.8
2.5
Operating Ambient Temperature Range . . . . . . . . . . . . . . . . 0°C to +85°C
Storage Ambient Temperature Range. . . . . . . . . . . . . . . -55°C to +150°C
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTE:
6. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
7. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Operating Conditions Boldface limits apply across the operating temperature range, 0°C to +85°C.
PARAMETER
SYMBOL
CONDITION
MIN
(Note 12)
TYP
1.0V Supply Voltage
AVDD1,
DVDD
0.95
1.0
1.8V Supply Voltage
AVDD18,
VDDPLL,
VDDPST
1.71
1.8
Operating Ambient Temperature
Baud Rate
T_A
NRZ data applied to any channel
0
9.95
25
10.3125
MAX
(Note 12)
1.05
1.89
85
10.4
UNITS
V
V
°C
Gbps
Logic I/O Specifications Boldface limits apply across the operating temperature range, 0°C to +85°C.
PARAMETER
SYMBOL
CONDITION
MIN
(Note 12)
TYP
Input Leakage Current
Pull-down Resistor Current
Input HIGH Voltage
I_LEAK Pins URX, AURX1, AURX2, RESET
I_PULLDOWN OSCMODE. V_IN = V_DD18
V_IH
Pins URX, AURX1, AURX2, RESET,
OSCMODE
-1
0.1
103
2
Input LOW Voltage
V_IL
Pins URX, AURX1, AURX2, RESET,
0
OSCMODE
Output LOW Voltage
V_OL
I_OL = 2mA
0
Output High Voltage
V_OH
I_OH = 2mA
1.4
MAX
(Note 12)
1
3.4
0.7
0.4
V_DD18
UNITS
µA
µA
V
V
V
V
5
FN8266.1
January 25, 2013