ISL28118_15 Datasheet, PDF (5/29 Pages) Intersil Corporation – 40V Precision Single-Supply, Rail-to-rail Output, Low-power Operational Amplifiers

ISL28118, ISL28218
Absolute Maximum Ratings
Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42V
Maximum Differential Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Maximum Differential Input Voltage . . . . . . . . 42V or V_- - 0.5V to V₊ + 0.5V
Min/Max Input Voltage . . . . . . . . . . . . . . . . . . . 42V or V_- - 0.5V to V₊ + 0.5V
Max/Min Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
Output Short-circuit Duration (1 output at a time) . . . . . . . . . . . . . . Indefinite
ESD Tolerance
Human Body Model (Tested per JESD22-A114F) . . . . . . . . . . . . . . . . 3kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . 300V
Charged Device Model (Tested per JESD22-CI0ID). . . . . . . . . . . . . . . 2kV
ESD Tolerance (ISL28118 SOIC package only)
Human Body Model (Tested per JESD22-A114F) . . . . . . . . . . . . . . 5.5kV
Machine Model (Tested per JESD22-A115-C) . . . . . . . . . . . . . . . . . 300V
Charged Device Model (Tested per JESD22-CI0ID). . . . . . . . . . . . . . . 2kV
Thermal Information
Thermal Resistance (Typical)
_JA (°C/W) _JC (°C/W)
ISL28118
8 Ld SOIC Package (Notes 4, 5) . . . . . . . . . 120
60
8 Ld MSOP Package (Notes 4, 5) . . . . . . . . 165
57
ISL28218
8 Ld SOIC Package (Notes 4, 5) . . . . . . . . . 120
55
8 Ld MSOP Package (Notes 4, 5) . . . . . . . . 150
58
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493
Recommended Operating Conditions
Ambient Operating Temperature Range . . . . . . . . . . . . . -40°C to +125°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . +150°C
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . 3V (+1.8V/-1.2V) to 40V (±20V)
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. _JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. For _JC, the “case temp” location is taken at the package top center.
Electrical Specifications (V_S ±15V) V_CM = 0, V_O = 0V, R_L = Open, T_A= +25°C, unless otherwise noted. Boldface entries apply
across the operating temperature range, -40°C to +125°C. Temperature data established by characterization.
PARAMETER
DESCRIPTION
TEST CONDITIONS
MIN
(Note 6)
MAX
TYP
(Note 6) UNIT
V_OS
Input Offset Voltage
ISL28118
-150
25
150
µV
-270
270
µV
ISL28218
-230
40
230
µV
-290
290
µV
TCV_OS
Input Offset Voltage Temperature ISL28118
Coefficient
ISL28218
-1.2
0.2
1.2
µV/°C
-1.4
0.3
1.4
µV/°C
V_OS
Input Offset Voltage Match
(ISL28218 only)
All packages
SOIC
-280
44
280
µV
-365
365
µV
MSOP
-390
390
µV
I_B
Input Bias Current
-575
-230
nA
-800
nA
TCI_B
Input Bias Current
Temperature Coefficient
-0.8
nA/°C
I_OS
Input Offset Current
-50
4
50
nA
-75
75
nA
CMRR
Common Mode Rejection Ratio
V_CM = V_- - 0.5V to V₊ - 1.8V
V_CM = V_- to V₊ -1.8V
ISL28118 SOIC
118
dB
102
118
dB
98
dB
V_CM = V_- to V₊ -1.8V
ISL28218 SOIC
103
118
dB
99
dB
V_CM = V_- to V₊ -1.8V
102
118
dB
ISL28118 and ISL28218 MSOP
97
dB
V_CMIR
Common Mode Input Voltage
Range
Guaranteed by CMRR test
V_- - 0.5
V_-
V₊ - 1.8
V
V₊ - 1.8
V
Submit Document Feedback
5
FN7532.7
July 27, 2015