ISL28118_15 Datasheet, PDF (26/29 Pages) Intersil Corporation – 40V Precision Single-Supply, Rail-to-rail Output, Low-power Operational Amplifiers

ISL28118, ISL28218
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest Rev.
DATE
REVISION
CHANGE
July 27, 2015
FN7532.7 Page 1 under Features:
Removed bullet 3 (Rail-to-rail input differential voltage range for comparator application).
Added to the end of bullet 2 "ground sensing".
July 15, 2015
FN7532.6 Figures 48 and 78 changed Y-axis from (V) to (mV).
May 1, 2014
FN7532.5
Updated Spice model netlist on page 22.
Absolute Maximum Ratings table on page 5: Added ESD Tolerance (ISL28118 SOIC package only).
Changed POD:
FROM M8.118: Corrected lead width dimension in side view 1 from "0.25 - 0.036" to "0.25 - 0.36"
To M8.118B: Correct lead dimension in side view 2 from 0.15 - 0.05mm to 0.15+/-0.05mm.
January 24, 2013
FN7532.4
Added ISL28218 MSOP specifications, and removed references to ISL28118 and ISL28218 TDFN options.
page 1: Removed “8 Ld TDFN” from last paragraph of description.
page 3: Removed TDFN “Pin Configurations”, and TDFN columns and the “PAD” row from “Pin Descr” table.
Moved Ordering Information table from pg 3 to page 2. Removed “Coming Soon” from ISL28218FUZ and added “Note
1” reference, and deleted 2 TDFN offerings in “Ordering Info” table.
page 5: Removed TDFN entries from “Thermal Resistance” section, and removed notes 5 and 6.
Added delta Vos MSOP row, with limits of ±390µA, and added “ISL28218” to the CMRR MSOP entry.
page 6: added “ISL28218” to the existing AVOL MSOP entry.
page 7: added new +25°C 28218 MSOP row with 107dB min limit, and added “ISL28218 MSOP” to the existing
ISL28118 MSOP full temp row for PSRR.
page 7: added “ISL28218” to the existing CMRR SOIC and MSOP rows, and deleted the “ISL28218” rows.
page 7: added “ISL28218 MSOP” to the existing ISL28118 MSOP rows for AVOL.
page 9: added “+25°C” to “default conditions” info at top of page.
Moved “sales Info” from p25 to p23.
Removed TDFN package outline drawing.
August 31, 2011
FN7532.3
Page 7: Electrical Spec Table for Supply Current/Amplifier
Change from: 1.4µA Full Temp Max
Change to: 1.4mA Full Temp Max
Page 28: Updated POD M8.118 to current revision. Corrected lead width dimension in side view 1 from "0.25 - 0.036" to
"0.25 - 0.36".
May 9, 2011
FN7532.2
Page 2: Added NC pin to Pin Descriptions table.
Page 3: Added ISL28218EVAL1Z evaluation board to the Ordering Information table.
Page 12: Added new Output Overhead Voltage plots (Figs. 31,32)
Pages 19 through 24: Added SPICE model schematic, netlist, description and Figs. 66 through 80.
November 12, 2010
FN7532.1
On page 1: Features Section, added Low input offset voltage and superb offset voltage temperature drift for
ISL28118.
Updated Intersil trademark statement (bottom of page)
On page 4: Removed “coming soon” from ISL28118FBZ. Updated tape & reel note.
On page 5: Change ISL28118 Theta JA value from 158 to 165. Added ISL28118 min/max specs to VOS (input
offset voltage), TCVOS and min specs to CMRR.
On page 6: Added AVOL MIN spec for ISL28118 in dB. Changed existing AVOL spec from V/mV to dB. Added VOL
max spec for ISL28118, IS Typ and Max spec for ISL28118. Changed TS from 18µs to 8.5µs.
On page 7: Added Min Max VOS spec, TCVOS spec for ISL28118. Changed AVOL specs from V/mV to dB.
On page 8: Changed Slew Rate TYP from ±1.2V/µs to ±1V/µs. Added for TS TYP spec = 4µs. Changed min/max
note 6 to “Compliance to datasheet limits is assured by one or more methods: production test, characterization
and/or design.” Added Figs 3 & 4 for ISL28118. Figures 5 & 6 moved to page 9.
On page 9: Added Figures 7 & 8
On page 11: Added Figures 15 & 16 for ISL28118
On page 11, in Figure 19, changed VS from ±5V to ±15V
On page 13 and page 14: Added Figures 27, 28, 31 & 34 for ISL28118
On page 14: Added Figure 35 for ISL28118
On page 15: Figure 41 changed VS from ±18V to ±5V, Figure 42 added RL = 2k, Figure 43 added RL = 10k and
corrected "HD+N" to "THD+N"
On page 16, Figure 44 added RL = 2k, Figure 45 RL = 10k.
On page 18: Added Figure 58 for ISL28118
On page 18, Figure 58 and 59, graph upper left corner changed VS = ±5V to VS = ±15V
On page 18, Figure 61, deleted VS = ±5V
September 16, 2010 FN7532.0 Initial Release
Submit Document Feedback ₂₆
FN7532.7
July 27, 2015