HCS245MS Datasheet, PDF (5/7 Pages) Intersil Corporation – Radiation Hardened Octal Bus Transceiver, Three-State, Non-Inverting

Specifications HCS245MS
TABLE 8. STATIC BURN-IN AND DYNAMIC BURN-IN TEST CONNECTIONS
OPEN
GROUND
1/2 VCC = 3V ± 0.5V
VCC = 6V ± 0.5V
STATIC BURN-IN I TEST CONNECTIONS (Note 1)
2-9
1, 10 - 19
-
20
STATIC BURN-IN II TEST CONNECTIONS (Note 1)
-
10
-
1 - 9, 11 - 20
DYNAMIC BURN-IN TEST CONNECTIONS (Note 2)
-
10
11 - 18
1, 20
NOTES:
1. Each pin except VCC and GND will have a resistor of 10KΩ ± 5% for static burn-in.
2. Each pin except VCC and GND will have a resistor of 680Ω ± 5% for dynamic burn-in.
OSCILLATOR
50kHz
25kHz
-
-
-
-
2-9
19
TABLE 9. IRRADIATION TEST CONNECTIONS
OPEN
GROUND
VCC = 5V ± 0.5V
-
10
1 - 9, 11 - 20
NOTE: Each pin except VCC and GND will have a resistor of 47KΩ ± 5% for irradiation testing. Group E, Sub-
group 2, sample size is 4 dice/wafer 0 failures.
AC Timing Diagrams
VIH
VIL
VOH
VOL
VS
INPUT
TPLH
VS
TPHL
OUTPUT
VOH
VOL
TTLH
20%
80% 80%
OUTPUT
AC VOLTAGE LEVELS
TTHL
20%
PARAMETER
VCC
VIH
VS
VIL
GND
HCS
4.50
4.50
2.25
0
0
UNITS
V
V
V
V
V
AC Load Circuit
DUT
CL
CL = 50pF
RL = 500Ω
7-479
TEST
POINT
RL