|
HCS245MS Datasheet, PDF (2/7 Pages) Intersil Corporation – Radiation Hardened Octal Bus Transceiver, Three-State, Non-Inverting | |||
|
◁ |
Speciï¬cations HCS245MS
Absolute Maximum Ratings
Reliability Information
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +7.0V
Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VCC +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA
DC Drain Current, Any One Output. . . . . . . . . . . . . . . . . . . . . . .±25mA
(All Voltage Reference to the VSS Terminal)
Storage Temperature Range (TSTG) . . . . . . . . . . . -65oC to +150oC
Lead Temperature (Soldering 10sec) . . . . . . . . . . . . . . . . . . +265oC
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
ESD Classiï¬cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Thermal Impedance . . . . . . . . . . . . . . . .
θja
Weld Seal DIC . . . . . . . . . . . . . . . . . . . 75oC/W
Weld Seal Flat Pack . . . . . . . . . . . . . . 64oC/W
θjc
16oC/W
12oC/W
Power Dissipation per Package (PD)
For TA = -55oC to +100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W
For TA = +100oC to +125oC Derate Linearly at 13mW/oC
CAUTION: As with all semiconductors, stress listed under âAbsolute Maximum Ratingsâ may be applied to devices (one at a time) without resulting in permanent
damage. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. The conditions listed
under âElectrical Performance Characteristicsâ are the only conditions recommended for satisfactory device operation.
Operating Conditions
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Input Rise and Fall Times at 4.5V VCC (TR, TF) . . . . . . 500ns Max.
Operating Temperature Range (TA) . . . . . . . . . . . . -55oC to +125oC
Input Low Voltage (VIL). . . . . . . . . . . . . . . . . . . 0.0V to 30% of VCC
Input High Voltage (VIH) . . . . . . . . . . . . . . . . . . 70% of VCC to VCC
TABLE 1. DC. ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETERS
Quiescent Current
SYMBOL
ICC
(NOTE 1)
CONDITIONS
VCC = 5.5V,
VIN = VCC or GND
Output Current
(Sink)
IOL
VCC = 4.5V, VIH = 4.5V,
VOUT = 0.4V, VIL = 0V
Output Current
(Source)
Output Voltage Low
Output Voltage High
Input Leakage
Current
Three-State Output
Leakage Current
IOH
VOL
VOH
IIN
IOZ
VCC = 4.5V, VIH = 4.5V,
VOUT = VCC -0.4V,
VIL = 0V
VCC = 4.5V, VIH = 3.15V,
IOL = 50µA, VIL = 1.35V
VCC = 5.5V, VIH = 3.85V,
IOL = 50µA, VIL = 1.65V
VCC = 4.5V, VIH = 3.15V,
IOH = -50µA, VIL = 1.35V
VCC = 5.5V, VIH = 3.85V,
IOH = -50µA, VIL = 1.65V
VCC = 5.5V, VIN = VCC or
GND, VCC = 4.5V and
5.5V
Applied Voltage = 0V or
VCC
Noise Immunity
Functional Test
FN
VCC = 4.5V,
VIH = 0.70(VCC),
VIL = 0.30(VCC) (Note 2)
GROUP
A SUB-
GROUPS
1
2, 3
1
2, 3
1
2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1
2, 3
1
2, 3
7, 8A, 8B
TEMPERATURE
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC, +125oC, -55oC
+25oC, +125oC, -55oC
+25oC, +125oC, -55oC
+25oC, +125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC, +125oC, -55oC
NOTE:
1. All voltages reference to device GND.
2. For functional tests, VO ⥠4.0V is recognized as a logic â1â, and VO ⤠0.5V is recognized as a logic â0â.
LIMITS
MIN MAX
-
40
-
750
7.2
-
6.0
-
7.2
-
6.0
-
-
0.1
-
0.1
VCC
-
-0.1
VCC
-
-0.1
-
±0.5
-
±5.0
-
±1
-
±50
-
-
UNITS
µA
µA
mA
mA
mA
mA
V
V
V
V
µA
µA
µA
µA
-
7-476
|
▷ |