CD4067BMS Datasheet, PDF (5/10 Pages) Intersil Corporation – CMOS Analog Multiplexers/Demultiplexers

Specifications CD4067BMS, CD4097BMS
TABLE 6. APPLICABLE SUBGROUPS
CONFORMANCE GROUP
MIL-STD-883
METHOD
GROUP A SUBGROUPS
Group A
Sample 5005
1, 2, 3, 7, 8A, 8B, 9, 10, 11
Group B
Subgroup B-5
Sample 5005
1, 2, 3, 7, 8A, 8B, 9, 10, 11, Deltas
Subgroup B-6
Sample 5005
1, 7, 9
Group D
Sample 5005
1, 2, 3, 8A, 8B, 9
NOTE: 1. 5% Parameteric, 3% Functional; Cumulative for Static 1 and 2.
READ AND RECORD
Subgroups 1, 2, 3, 9, 10, 11
Subgroups 1, 2 3
CONFORMANCE GROUPS
Group E Subgroup 2
TABLE 7. TOTAL DOSE IRRADIATION
MIL-STD-883
METHOD
TEST
PRE-IRRAD
POST-IRRAD
5005
1, 7, 9
Table 4
READ AND RECORD
PRE-IRRAD
POST-IRRAD
1, 9
Table 4
TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS
OSCILLATOR
FUNCTION
OPEN
GROUND
VDD
9V ± -0.5V
50kHz
25kHz
PART NUMBER CD4067BMS
Static Burn-In 1 Note 1
1
2 - 23
24
Static Burn-In 2 Note 1
1
12
2 - 11, 13 - 24
Dynamic Burn-In Note 1
-
12, 15
24
1
2 - 9, 16 - 23 10, 11, 13, 14
(Note 3)
Irradiation Note 2
1
12
2 - 11, 13 - 24
PART NUMBER CD4097BMS
Static Burn-In 1 Note 1
1, 17
2 - 16, 18 - 23
24
Static Burn-In 2 Note 1
1, 17
12
2 - 11, 13 - 16,
18 - 24
Dynamic Burn-In Note 1
-
12, 13
24
1, 17
2 - 9, 15, 16,
18 - 23
10, 11, 14
(Note 4)
Irradiation Note 2
1, 17
12
2 - 11, 13 - 16,
18 - 24
NOTE:
1. Each pin except VDD and GND will have a series resistor of 10K ± 5%, VDD = 18V ± 0.5V
2. Each pin except VDD and GND will have a series resistor of 47K ± 5%; Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures,
VDD = 10V ± 0.5V
3. Pin 10 is at 14kHz, Pin 11 is at 7kHz, Pin 13 is at 1.7kHz, Pin 14 is at 3.5kHz
4. Pin 10 is at 14kHz, Pin 11 is at 7kHz, Pin 14 is at 3.5kHZ
7-5