English
Language : 

CD4067BMS Datasheet, PDF (1/10 Pages) Intersil Corporation – CMOS Analog Multiplexers/Demultiplexers
December 1992
CD4067BMS
CD4097BMS
CMOS Analog
Multiplexers/Demultiplexers
Features
Pinout
• High Voltage Types (20V Rating)
• CD4067BMS Single 16 Channel Multiplexer/Demultiplexer
• CD4097BMS Differential 8 Channel Multiplexer/Demulti-
plexer
• Low ON Resistance: 125Ω (typ) Over 15Vp-p Signal
Input Range for VDD - VSS = 15V
• High OFF Resistance: Channel Leakage of ±10pA (typ)
at VDD - VSS = 18V
• Matched Switch Characteristics: RON = 5Ω (typ) for
VDD - VSS = 15V
• Very Low Quiescent Power Dissipation Under All Digi-
tal Control Input and Supply Conditions: 0.2µW (typ)
at VDD - VSS = 10V
• Binary Address Decoding on Chip
• 5V, 10V and 15V Parametric Ratings
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1µA at 18V Over Full Pack-
age Temperature Range; 100nA at 18V and +25oC
• Standardized Symmetrical Output Characteristics
CD4067BMS
TOP VIEW
COMMON OUT/IN 1
72
63
54
45
*
36
27
18
09
A 10
B 11
* CHANNEL
IN/OUT
VSS
12
24 VDD
23 8
22 9
21 10
20 11
19 12 *
18 13
17 14
16 15
15 INHIBIT
14 C
13 D
Applications
• Analog and Digital Multiplexing and Demultiplexing
• A/D and D/A Conversion
• Signal Gating
* When these devices are used as demultiplexers the “CHANNEL
IN/OUT” terminals are the outputs and the “COMMON OUT/IN” ter-
minals are the inputs.
Description
CD4067BMS and CD4097BMS CMOS analog multiplexers/
demultiplexers* are digitally controlled analog switches having
low ON Impedance, low OFF leakage current, and internal
address decoding. In addition, the ON resistance is relatively
constant over the full input-signal range.
The CD4067BMS is a 16 channel multiplexer with four binary
control inputs, A, B, C, D and an inhibit input, arranged so that
any combination of the inputs selects one switch.
The CD4097BMS is a differential 8 channel multiplexer having
three binary control inputs A, B, C and an inhibit input. The inputs
permit selection of one of eight pairs of switches. A logic “1”
present at the inhibit input turns all channels off.
CD4097BMS
TOP VIEW
COMMON X
OUT/IN 1
72
63
CHANNEL X
IN/OUT
54
45
36
27
18
09
A 10
B 11
VSS 12
24 VDD
23 0
22 1
21 2
20 3
Y CHANNEL
IN/OUT
19 4
18 5
17 COMMON Y
OUT/IN
16 6 Y CHANNEL
15 7 IN/OUT
14 C
13 INHIBIT
The CD4067BMS and CD4097BMS are supplied in these 24
lead outline packages:
Braze Seal DIP
Frit Seal DIP
Ceramic Flatpack
*CD4067B Only
*H4V
†H6M
*H1Z
†HFN
*H4P
†H4P
†CD4097B
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
7-1
File Number 3190