CD4029BMS Datasheet, PDF (5/11 Pages) Intersil Corporation – CMOS Presettable Up/Down Counter

Specifications CD4029BMS
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
LIMITS
PARAMETER
Minimum Preset Enable
Pulse Width
Input Capacitance
SYMBOL
CONDITIONS
TW VDD = 5V
VDD = 10V
VDD = 15V
CIN Any Input
NOTES
1, 2, 3
1, 2, 3
1, 2, 3
1, 2
TEMPERATURE MIN
+25^oC
-
+25^oC
-
+25^oC
-
+25^oC
-
MAX
130
70
50
7.5
UNITS
ns
ns
ns
pF
NOTES:
1. All voltages referenced to device GND.
2. The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterized
on initial design release and upon design changes which would affect these characteristics.
3. CL = 50pF, RL = 200K, Input TR, TF < 20ns.
4. From Up/Down, Binary/Decode, Carry In, or Preset Enable Control Inputs to Clock Edge.
5. If more than one unit is cascaded in the parallel clocked application, tr CL should be made ≤ the sum of the fixed propagation delay at
15pF and the transition time of the carry output driving stage for the estimated capacitive load. This measurement was made with a de-
coupling capacitor (>1µF) between VDD and VSS.
6. From Carry In to Clock Edge.
TABLE 4. POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS
LIMITS
PARAMETER
Supply Current
N Threshold Voltage
N Threshold Voltage
Delta
P Threshold Voltage
P Threshold Voltage
Delta
Functional
Propagation Delay Time
SYMBOL
CONDITIONS
IDD VDD = 20V, VIN = VDD or GND
VNTH VDD = 10V, ISS = -10µA
∆VTN VDD = 10V, ISS = -10µA
VTP
∆VTP
VSS = 0V, IDD = 10µA
VSS = 0V, IDD = 10µA
F
TPHL
TPLH
VDD = 18V, VIN = VDD or GND
VDD = 3V, VIN = VDD or GND
VDD = 5V
NOTES
1, 4
1, 4
1, 4
1, 4
1, 4
1
1, 2, 3, 4
TEMPERATURE MIN
+25^oC
-
+25^oC
-2.8
+25^oC
-
MAX
25
-0.2
±1
+25^oC
+25^oC
0.2
2.8
-
±1
+25^oC
+25^oC
VOH > VOL <
VDD/2 VDD/2
-
1.35 x
+25^oC
Limit
NOTES: 1. All voltages referenced to device GND.
2. CL = 50pF, RL = 200K, Input TR, TF < 20ns
3. See Table 2 for +25^oC limit.
4. Read and Record
UNITS
µA
V
V
V
V
V
ns
TABLE 5. BURN-IN AND LIFE TEST DELTA PARAMETERS +25^OC
PARAMETER
SYMBOL
DELTA LIMIT
Supply Current - MSI-2
Output Current (Sink)
Output Current (Source)
IDD
IOL5
IOH5A
± 1.0µA
± 20% x Pre-Test Reading
± 20% x Pre-Test Reading
7-802