English
Language : 

ISL6523A Datasheet, PDF (4/16 Pages) Intersil Corporation – VRM8.5 Dual PWM and Dual Linear Power System Controller
ISL6523A
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+15V
PGOOD, RT/FAULT, DRIVE, PHASE, and
GATE Voltage. . . . . . . . . . . . . . . . . . . GND - 0.3V to VCC + 0.3V
Input, Output or I/O Voltage . . . . . . . . . . . . . . . . . . GND -0.3V to 7V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Recommended Operating Conditions
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . +12V ±10%
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . 0oC to 70oC
Junction Temperature Range. . . . . . . . . . . . . . . . . . . 0oC to 125oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
Maximum Junction Temperature (Plastic Package) . . . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications Recommended Operating Conditions, Unless Otherwise Noted. Refer to Figures 1, 2 and 3
PARAMETER
SYMBOL
TEST CONDITIONS
VCC SUPPLY CURRENT
Nominal Supply Current
ICC
UGATE1, LGATE1, UGATE2, DRIVE3, and
DRIVE4 Open
POWER-ON RESET
Rising VCC Threshold
Falling VCC Threshold
Rising VAUX Threshold
VAUX Threshold Hysteresis
Rising VOCSET1 Threshold
OSCILLATOR
Free Running Frequency
FOSC
Ramp Amplitude
∆VOSC
DAC AND STANDARD BUCK REGULATOR REFERENCE
DAC (VID25-VID3) Input Low Voltage
DAC (VID25-VID3) Input High Voltage
DACOUT Voltage Accuracy
PWM2 Regulation Voltage
PWM2 Regulation Voltage Tolerance
1.5V AND 1.8V LINEAR REGULATORS (VOUT3 AND VOUT4)
Regulation Tolerance
VSEN3 Regulation Voltage
VSEN4 Regulation Voltage
VSEN3,4 Under-Voltage Level
VSEN3 Under-Voltage Hysteresis
VREG3
VREG4
VSEN3,4UV
VSEN3,4 Rising
VSEN3 Falling
Output Drive Current
VAUX-VDRIVE3,4 > 0.6V
SYNCHRONOUS PWM CONTROLLER ERROR AMPLIFIER
DC Gain
Note 2
Gain-Bandwidth Product
GBWP Note 2
Slew Rate
SR
COMP1 = 10pF, Note 2
PWM CONTROLLERS GATE DRIVERS
UGATE1,2 Source
UGATE1,2 Sink
IUGATE
RUGATE
VCC = 12V, VUGATE1 (or VUGATE2) = 6V
VGATE-PHASE = 1V
MIN TYP MAX
-
9
-
-
- 10.4
8.2
-
-
-
2.5
-
-
0.5
-
- 1.26 -
185 200 215
-
1.9
-
-
-
0.8
2.0
-
-
-1.0
-
+1.0
-
1.2
-
-
3
-
-
3
-
-
1.5
-
-
1.8
-
-
75
-
-
7
-
20 40
-
-
88
-
-
15
-
-
6
-
-
1
-
-
1.7 3.5
UNITS
mA
V
V
V
V
V
kHz
VP-P
V
V
%
V
%
%
V
V
%
%
mA
dB
MHz
V/µs
A
Ω
4