ISL32613E Datasheet, PDF (4/11 Pages) Intersil Corporation – ±16.5kV ESD Protected, +125°C, 1.8V to 3.6V, Low Power, SOT-23, RS-485/RS-422 Transmitters

ISL32613E, ISL32614E
Absolute Maximum Ratings
V_CC to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 7V
Input Voltages
DI, DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 7V
Output Voltages
Y, Z (V_CC = 0V or ≥ 2.7V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -8V to +13V
Y, Z (V_CC = 1.8V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -8V to +3V
Short Circuit Duration
Y, Z. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . see “Electrical Specifications”
Latch-up (per JESD78, Level 2, Class A) . . . . . . . . . . . . . . . . . . . . . . +125°C
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
6 Ld SOT-23 Package (Notes 5, 6). . . . . . . . 177
95
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . -65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Supply Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8V to 3.3V
Common Mode Range; V_CC = 1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±2V
V_CC ≥ 2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -7V to +12V
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +125°C
R_D; V_CC = 1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥10kΩ
V_CC ≥ 2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥60Ω
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
5. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
6. For θ_JC, the “case temp” location is taken at the package top center.
Electrical Specifications V_CC = 1.8V; typicals are at T_A = +25°C; unless otherwise specified. Boldface limits apply over the operating
temperature range, -40°C to +125°C. (Note 7)
PARAMETER
SYMBOL
TEST CONDITIONS
TEMP MIN
MAX
(°C) (Note 10) TYP (Note 10) UNITS
DC CHARACTERISTICS
Driver Differential V_OUT
V_OD
Change in Magnitude of Driver
ΔV_OD
Differential V_OUT for Complementary
Output States
R_L = 100Ω (Figure 2)
V_CC = 1.8V
V_CC ≥ 3.15V
R_L = 54Ω (Figure 2), V_CC ≥ 3V
No Load
R_L = 100Ω (Figure 2)
Full 0.8 0.92
-
V
Full
2
-
-
V
Full 1.5
-
-
V
Full 1.1 1.45 V_CC
V
Full
-
0.01 0.2
V
Driver Common-Mode V_OUT
Change in Magnitude of Driver
Common-Mode V_OUT for
Complementary Output States
V_0C
ΔV_OC
R_L = 100Ω (Figure 2)
R_L = 100Ω (Figure 2)
Full
-
1.1
1.4
V
Full
-
0.01 0.2
V
Logic Input High Voltage (DI, DE)
V_IH
Logic Input Low Voltage (DI, DE)
V_IL
Logic Input Current
I_IN
Output Leakage Current
I_OZ
(Y, Z, Note 9)
Driver Short-Circuit Current,
I_OS
V_O = High or Low (Note 8)
V_CC = 1.8V
Full 1.26
-
-
V
2.7V ≤ V_CC ≤ 3.6V
Full 2.2
-
-
V
V_CC = 1.8V
Full
-
-
0.4
V
2.7V ≤ V_CC ≤ 3.6V
Full
-
-
0.8
V
DI = DE = 0V or V_CC (Note 9)
Full
-2
-
2
µA
DE = 0V,
V_O = 7V at V_CC = 1.8V Full
-
V_CC = 0V or 1.8V, or 3.6V _{VO = 12V at VCC = 3.6V Full}
-
0.1
30
µA
0.1
40
µA
V_O = -7V
Full -40
-8
-
µA
V_CC = 1.8V, DE = V_CC, -2V ≤ V_O ≤ 2V
Full
-
-
±250 mA
V_CC ≥ 2.7V, DE = V_CC, -7V ≤ V_O ≤ 12V
Full
-
±150
-
mA
4
FN7906.0
August 30, 2011