ISL32613E Datasheet, PDF (2/11 Pages) Intersil Corporation – ±16.5kV ESD Protected, +125°C, 1.8V to 3.6V, Low Power, SOT-23, RS-485/RS-422 Transmitters

ISL32613E, ISL32614E
Pin Configuration
ISL32613E, ISL32614E
(6 LD SOT-23)
TOP VIEW
DI 1
6Y
V_CC 2
D
5 GND
DE 3
4Z
Pin Descriptions
SOT-23
1
2
3
4
5
6
SYMBOL
FUNCTION
DI Driver input. A low on DI forces output Y low and
output Z high. Similarly, a high on DI forces
output Y high and output Z low.
V_CC System power supply input (1.8V to 3.6V).
DE Driver output enable. The driver outputs, Y and
Z, are enabled by bringing DE high, and are high
impedance when DE is low. If the driver enable
function is not needed, connect DE to V_CC
through a 1kΩ to 2kΩ resistor.
Z
±16.5kV HBM, ±7kV IEC61000 (contact
method) ESD Protected inverting differential
transmitter output.
GND Ground connection.
Y
±16.5kV HBM, ±7kV IEC61000 (contact
method) ESD Protected noninverting
differential transmitter output.
PART NUMBER
ISL32613E
ISL32614E
FUNCTION
1 Tx
1 Tx
TABLE 1. SUMMARY OF FEATURES AT V_CC = 1.8V
DATA RATE
(kbps)
128
SLEW-RATE
LIMITED?
Yes
HOT
PLUG?
Yes
TX ENABLE?
(Note 9)
Yes
MAXIMUM QUIESCENT
I_CC (µA)
80
256
Yes
Yes
Yes
80
LOW POWER
SHUTDOWN?
Yes
Yes
PIN
COUNT
6 Ld SOT
6 Ld SOT
Ordering Information
PART NUMBER
(Notes 1, 2)
PART
MARKING
(Note 4)
TEMP. RANGE (°C)
PACKAGE
(Tape and Reel)
(Pb-Free)
PKG. DWG. #
ISL32613EFHZ-T
613F
-40 to +125
6 Ld SOT-23
P6.064
ISL32614EFHZ-T
614F
-40 to +125
6 Ld SOT-23
P6.064
NOTES:
1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. Please refer to TB347 for details on reel specifications.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL32613E, ISL32614E. For more information on MSL please see
techbrief TB363.
4. SOT-23 “PART MARKING” is branded on the bottom side.
2
FN7906.0
August 30, 2011