|
ICM7228 Datasheet, PDF (4/17 Pages) Intersil Corporation – 8-Digit, Microprocessor- Compatible, LED Display Decoder Driver | |||
|
◁ |
ICM7228
Absolute Maximum Ratings
Supply Voltage (VDD - VSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Digit Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mA
Segment Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA
Input Voltage (Note 1) (Any Terminal). . .(VSS-0.3V)<VIN<(VDD+0.3V)
Operating Conditions
Operating Temperature Range
IPI, IJI, IBI Sufï¬x . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC
MJl Sufï¬x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
Thermal Information
Thermal Resistance (Typical, Note 2)
θJA (oC/W) θJC (oC/W)
CERDIP Package . . . . . . . . . . . . . . . .
55
12
PDIP Package . . . . . . . . . . . . . . . . . . .
60
N/A
SOIC Package . . . . . . . . . . . . . . . . . . .
75
N/A
Maximum Junction Temperature
IPI, IBI Sufï¬x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150oC
MJI, IJI Sufï¬x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175oC
Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in âAbsolute Maximum Ratingsâ may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this speciï¬cation is not implied.
NOTES:
1. Due to the SCR structure inherent in the CMOS process used to fabricate these devices, connecting any terminal to a voltage greater
than VDD or less then VSS may cause destructive device latchup. For this reason, it is recommended that no inputs row sources operating
on a different power supply be applied to the device before its own supply is established, and when using multiple supply systems the
supply to the ICM7228 should be turned on ï¬rst.
2. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Speciï¬cations VDD = +5.0V ±10%, VSS = 0V, Unless Otherwise Speciï¬ed
INDUSTRIAL TEMPERATURE RANGE, IPI, IJI, LBI DEVICES
TA = 25oC
PARAMETER
TEST CONDITIONS
MIN TYP MAX
Supply Voltage Range, VSUPPLY
Operating
Power Down Mode
4
-
6
2
-
-
Quiescent Supply Current, IQ
Shutdown, ICM7228A, IMC7228B
Shutdown, 7228C, 7228D
-
1
100
-
2.5 100
Operating Supply Current, IDD
Common Anode, ICM7228A/C
Segments = ON; Outputs = OPEN
-
200 450
Common Anode, ICM7228A/C
Segments = OFF; Outputs = OPEN
-
100 450
Common Cathode, ICM7228B/D
Segments = ON; Outputs = OPEN
-
250 450
Common Cathode, ICM7228B/D
Segments = OFF; Outputs = OPEN
-
175 450
Digit Drive Current, IDIG
Digit Leakage Current, IDLK
Common Anode, ICM7228A/C
VOUT = VDD - 2.0V
Common Cathode, ICM7228B/D
VOUT = VSS + 1.0V
Shutdown Mode, VOUT = 2.0V
Common Anode, ICM7228A/C
200
-
-
50
-
-
-
1
100
Shutdown Mode, VOUT = 5.0V
Common Cathode, 7228B/D
-
1
100
Peak Segment Drive Current, ISEG
Segment Leakage Current, ISLK
Common Anode, ICM7228A/C
VOUT = VSS + 1.0V
Common Cathode, 7228B/D
VOUT = VDD - 2.0V
Shutdown Mode, VOUT = VDD
Common Anode, ICM7228A/C
20
25
-
10
12
-
-
1
50
Shutdown Mode, VOUT = VSS
Common Cathode, ICM7228B/D
-
1
50
Input Leakage Current, IIL
All Inputs Except Pin 9
ICM7228C, ICM7228D VIN = VSS
All Inputs Except Pin 9
ICM7228C, ICM7228D VIN = 5.0V
-
-
1
-
-
-1
-40oC TO 85oC
MIN TYP MAX
4
-
6
2
-
-
-
1
100
-
2.5 100
-
200 450
-
100 450
-
250 450
-
175 450
175
-
-
40
-
-
-
1
100
-
1
100
20
-
-
10
-
-
-
1
50
-
1
50
-
-
1
-
-
-1
UNITS
V
µA
µA
mA
µA
mA
µA
µA
9-20
|
▷ |